I have a handful of phones that work with 1.0.9. I was trying to upgrade to 1.2 and the UIP200 phones dont ring. below is my config for 1 phone. I tried it with and without the qualify=yes or qualify=no and did not seem to make a difference. still no ring. Any ideas on what might be the issue? THanks, Jerry -------- ; Jerry Phone [528] type=friend dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info username=something secret=something disallow=all allow=ulaw allow=alaw host=dynamic context=smvoice-sip callerid="Jerry" <528>
Jerry Geis wrote:> I have a handful of phones that work with 1.0.9. I was trying to upgrade > to 1.2 > and the UIP200 phones dont ring. > > below is my config for 1 phone. > > I tried it with and without the qualify=yes or qualify=no and did not > seem to make > a difference. still no ring. > > Any ideas on what might be the issue? > > THanks, > > Jerry > -------- > > ; Jerry Phone > [528] > type=friend > dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info > username=something > secret=something > disallow=all > allow=ulaw > allow=alaw > host=dynamic > context=smvoice-sip > callerid="Jerry" <528>Need to have: nat=never (or nat=route) Regards, -- Jason Becker Director & CEO Coalescent Systems Inc. Enabling Open Source Telephony 403.244.8089 www.coalescentsystems.ca
Jason, I added: nat=never qualify=no and I still cant get a UIP200 to ring when calling it after using 1.2? Any other suggestions? Thanks, Jerry Jerry Geis wrote:>/ I have a handful of phones that work with 1.0.9. I was trying to upgrade/>/ to 1.2 />/ and the UIP200 phones dont ring. />/ />/ below is my config for 1 phone. />/ />/ I tried it with and without the qualify=yes or qualify=no and did not />/ seem to make />/ a difference. still no ring. />/ />/ Any ideas on what might be the issue? />/ />/ THanks, />/ />/ Jerry />/ -------- />/ />/ ; Jerry Phone />/ [528] />/ type=friend />/ dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info />/ username=something />/ secret=something />/ disallow=all />/ allow=ulaw />/ allow=alaw />/ host=dynamic />/ context=smvoice-sip />/ callerid="Jerry" <528> / Need to have: nat=never (or nat=route) Regards, -- Jason Becker Director & CEO Coalescent Systems Inc. Enabling Open Source Telephony 403.244.8089