Bukoka Budoka
2005-Dec-01 15:51 UTC
[Asterisk-Users] Asterisk with ooh323 registers with a cisco gatekeeper but disconnects after 300
Hi,
after installing ooh323 i tried to register the Asterisk box to a cisco
gatekeeper.
In fact the Asterisk registers with the Cisco Gatekeeper. However after 300
sec (the default TTL) the Asterisk gets unregistered and never registers
again.
What follows is the h323_log:
[root@localhost ~]# more /var/log/asterisk/h323_log
---------Date 11/30/05---------
23:44:21:290 Signalling IP address is set to 10.10.10.10
23:44:21:290 Listen port number is set to 1720
23:44:21:290 Gatekeeper Mode - RasUseSpecificGatekeeper
23:44:21:290 Gatekeeper IP:port set to - 10.10.10.20:1719
23:44:21:290 Enabled RFC2833 DTMF capability for end-point
23:44:21:290 H323 listener creation - successful
23:44:21:290 Creating CMD listener at 10.10.10.10:7575
23:44:21:290 CMD listener creation - successful
23:44:21:296 H.323 Endpoint Configuration is as follows:
23:44:21:296 Trace File: /var/log/asterisk/h323_log
23:44:21:296 FastStart - enabled
23:44:21:296 H245 Tunneling - enabled
23:44:21:296 AutoAnswer - disabled
23:44:21:296 Terminal Type - 50
23:44:21:296 T35 CountryCode - 1
23:44:21:296 T35 Extension - 0
23:44:21:296 Manufacturer Code - 71
23:44:21:296 ProductID - objsys
23:44:21:296 VersionID - v0.8
23:44:21:296 Local signalling IP address - 10.10.10.10
23:44:21:297 H225 ListenPort - 1720
23:44:21:297 CallerID - asterisk
23:44:21:297 Call Establishment Timeout - 60 seconds
23:44:21:297 MasterSlaveDetermination Timeout - 30 seconds
23:44:21:297 TerminalCapabilityExchange Timeout - 30 seconds
23:44:21:297 LogicalChannel Timeout - 30 seconds
23:44:21:297 Session Timeout - 15 seconds
23:44:21:297 Gatekeeper Client Configuration:
23:44:21:297 Gatekeeper mode - UseSpecificGatekeeper
23:44:21:297 Gatekeeper To Use - 10.10.10.20:1719
23:44:21:297 H323 RAS channel creation - successful
23:44:21:298 Sent GRQ message
23:44:21:314 Gatekeeper Confirmed (GCF) message received.
23:44:21:314 Gatekeeper Confirmed
23:44:21:314 Sent RRQ message
23:44:21:326 Registration Confirm (RCF) message received
23:44:21:327 Gatekeeper supports KeepAlive, Registration TTL is 300
23:49:01:328 Sent RRQ message <----------------------------Here it tries
to register again but fails----
23:49:01:336 Registration Reject (RRJ) message received.
23:49:01:336 RRQ Rejected - Undefined Reason
23:49:01:336 Error: Gatekeeper error. Either Gk not responding or Gk
sending invalid messages
23:49:01:336 Error: Gatekeeper error detected. Closing GkClient as Gk mode
is UseSpecifcGatekeeper
23:49:01:336 Destroying Gatekeeper Client
23:49:01:336 Closed RAS channel
My ooh323.conf is as follows:
[general]
port=1720
bindaddr = 10.10.10.10
gateway = yes
;Whether asterisk should use fast-start and tunneling for H323 connections.
;Default - yes
;faststart=no
;h245tunneling=no
;H323-ID to be used for asterisk server
;Default - Asterisk PBX
h323id=ObjSysAsterisk
e164=1234567
;CallerID to use for calls
;Default - Same as h323id
callerid=asterisk
;Whether this asterisk server will use gatekeeper.
;Default - DISABLE
;gatekeeper = DISCOVER
;gatekeeper = a.b.c.d
;gatekeeper = DISABLE
gatekeeper = 10.10.10.20
;Location for H323 log file
;Default - /var/log/asterisk/h323_log
;logfile=/var/log/asterisk/h323_log
;Following values apply to all users/peers/friends defined below, unless
;overridden within their client definition
;Sets default context all clients will be placed in.
;Default - default
context = voip-h323
;Sets rtptimeout for all clients, unless overridden
;Default - 60 seconds
;rtptimeout=60 ; Terminate call if 60 seconds of no RTP activity
; when we're not on hold
;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
;tos=lowdelay
;amaflags = default
;The account code used by default for all clients.
;accountcode=h3230101
;The codecs to be used for all clients.Only ulaw and gsm supported as of
now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
disallow=all ;Note order of disallow/allow is important.
;allow=gsm
allow=ulaw
; dtmf mode to be used by default for all clients. Supports rfc2833,
q931keypad
; h245alphanumeric, h245signal.
;Default - rfc 2833
dtmfmode=rfc2833
; User/peer/friend definitions:
; User config options Peer config options
; ------------------ -------------------
; context
; disallow disallow
; allow allow
; accountcode accountcode
; amaflags amaflags
; dtmfmode dtmfmode
; rtptimeout ip
; port
; h323id
; email
; url
; e164
; rtptimeout
;
;Define users here
;Section header is extension
;[myuser1]
;type=user
;context=context1
;disallow=all
;allow=gsm
;allow=ulaw
;[mypeer1]
;type=peer
;context=context2
;ip=a.b.c.d ; UPDATE with appropriate ip address
;port=1720 ; UPDATE with appropriate port
;e164=101
When the Asterisk is registered to the Cisco Gatekeeper i get the following
from the Cisco box:
gk#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
===============================CallSignalAddr Port
RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.10.10.10 1720 10.10.10.10 13030 gk.mydoimain.com UNKN-GW
H323-ID: ObjSysAsterisk
E164-ID: 1234567
Total number of active registrations = 1
After the Asterisk gets unregistered i get the following:
gk#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
===============================CallSignalAddr Port
RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
Thank you,
Budoka.
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/