Hi Kris,
I have TE406P (same as your but quad span) working on 2.6.13 with
pre-empt.
I had it working fine with 2.6.14 but I could not switch card's IRQ from
CPU0 to CPU1 on the 2.6.14
On 2.6.13 CPU1 is handling IRQ's only for TE406P (with occasional timer
IRQ's sneaking in).
I suggest that you get the latest source for zaptel from SVN repository.
Regards
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kris Amy
Sent: Wednesday, 30 November 2005 19:31
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] TE210P & Linux SMP
Hi,
Does anyone have this card(specifically the wct4xxp driver) working
under
linux and running a SMP kernel?
I'm running it in a dual p4 xeon box and when I compile the kernel for
SMP
and then recompile libpri/zaptel the module doesn't behave
correctly(doesn't
pick up the pri's).
In addition the lights on the back do the following (when no cable is
plugged in):-
No module - alternate red really fast
Module under UP - alternate slow red
Module under SMP - Blank
I have tried the following kernels:-
2.4.29, 2.4.32, 2.6.14.
I would really like to see it working correctly under 2.6 in SMP (with
pre-empt etc). Otherwise half of this machine is kinda useless.