Hi On Sun, Nov 27, 2005 at 03:40:39PM -0800, Geotrix wrote:> Hello, > > I am trying to install zaptel wcfxo with X101.P board on Debian sarge without success. > (previously compiled and worked OK on Redhat kernel) > > On boot asterisk I have [chan_zap.so] => (Zapata Telephony w/PRI) !!!??? > but I have no PRI, I have fxo, x1001P digium > ................................................................................. > As a matter of fact when you type version on Asterissk-1.2.0 : > > "Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kaka@nyx" ... or something.Do you use the debs or build your own? apt-get install zaptel-source and use 'm-a a-i zaptel' to get a zaptel modules package.> > Anyone up there experienced that problem with Asterisk on Debian ? > Any trick ? > Eventually, how you define module type wcfxo in "zconfig.h" when you do not have PRI interface ?Begin: self promotion Hmmm..... why bother? http://xorcom.com/rapid will give you a fully-functioning Debian Sarge system with Zaptel pre-compiled. End: self promotion -- Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is http://tzafrir.org.il | | a Mutt's tzafrir@cohens.org.il | | best ICQ# 16849755 | | friend
On 11/27/05, Geotrix <cgtel2002@yahoo.fr> wrote:> Hello, > > I am trying to install zaptel wcfxo with X101.P board on Debian sarge without success. > (previously compiled and worked OK on Redhat kernel)and in debian ? for compiling it in debian i suggest you to install kernel-headers (tha same version of your running kernel), module-assistant and dpatch (install all with apt or aptitude) and zaptel and zaptel-source, of course :) When i compile it i copy the /boot/config-<running.kernel.version> to /usr/src/kernel-headers-<running.kernel.version>/.config and then make "cd /usr/src; m-a build zaptel" this will generate a .deb in . then just dpkg -i <name.of.the.deb.file.generated> and reboot. Then you should can modprobe zaptel, etc...> > On boot asterisk I have [chan_zap.so] => (Zapata Telephony w/PRI) !!!??? > but I have no PRI, I have fxo, x1001P digium > ................................................................................. > As a matter of fact when you type version on Asterissk-1.2.0 : > > "Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kaka@nyx" ... or something. >Taht your version is that, is OK. Because you are using Debian Stable and installing asterix from those repositories... and in stable thats the version of asterisk aviable> Anyone up there experienced that problem with Asterisk on Debian ? > Any trick ? > Eventually, how you define module type wcfxo in "zconfig.h" when you do not have PRI interface ? > > Thx, > GeoThanks, i hope this could help you :) Rodrigo> > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger > T?l?chargez cette version sur http://fr.messenger.yahoo.com > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Hello, I am trying to install zaptel wcfxo with X101.P board on Debian sarge without success. (previously compiled and worked OK on Redhat kernel) On boot asterisk I have [chan_zap.so] => (Zapata Telephony w/PRI) !!!??? but I have no PRI, I have fxo, x1001P digium ................................................................................. As a matter of fact when you type version on Asterissk-1.2.0 : "Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kaka@nyx" ... or something. Anyone up there experienced that problem with Asterisk on Debian ? Any trick ? Eventually, how you define module type wcfxo in "zconfig.h" when you do not have PRI interface ? Thx, Geo ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
Well, thanks, it might be great your package yet I would like to know how to adapt. I wouldn't like to rewrite Debian neither Asterisk but is somebody able to advice how you define modules in "zconfig.h" or whatever ? Any tip ? Geo>Hi > >On Sun, Nov 27, 2005 at 03:40:39PM -0800, Geotrix wrote: >> Hello, >> >> I am trying to install zaptel wcfxo with X101.P board on Debian sarge without success. >> (previously compiled and worked OK on Redhat kernel) >> >> On boot asterisk I have [chan_zap.so] => (Zapata Telephony w/PRI) !!!??? >> but I have no PRI, I have fxo, x1001P digium >> ................................................................................. >> As a matter of fact when you type version on Asterissk-1.2.0 : >> >> "Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kaka@nyx" ... or something. > >Do you use the debs or build your own? apt-get install zaptel-source and >use 'm-a a-i zaptel' to get a zaptel modules package. > >> >> Anyone up there experienced that problem with Asterisk on Debian ? >> Any trick ? >> Eventually, how you define module type wcfxo in "zconfig.h" when you do not have PRI interface ? > >Begin: self promotion > >Hmmm..... why bother? http://xorcom.com/rapid will give you a >fully-functioning Debian Sarge system with Zaptel pre-compiled. > >End: self promotion > >-- >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >http://tzafrir.org.il | | a Mutt's >tzafrir@cohens.org.il | | best >ICQ# 16849755 | | friend >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
It should build wcfxo. Not trying anything special. I just follow the procedure ! When I reboot I have: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded !!!???? HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 I don't need ISDN, I do not configure any ISDN and I have no ISDN BRIstuffed or whatever !!!! Is ISDN susbsystem needed for using fxo devices using fxs signalling with Asterisk ? than Zapata Telephony Interface Registered on major 196 wcfxo: disagrees about version of symbol zt_receive wcfxo: Unknown symbol zt_receive wcfxo: disagrees about version of symbol zt_ec_chunk wcfxo: Unknown symbol zt_ec_chunk wcfxo: disagrees about version of symbol zt_transmit .................................. Testing modprobe zaptel => OK zaptel driver but not wcfxo and ztcfg -vvv Zaptel Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) Yet my config is OK. ============================================Installind Asterisk make install compiling OK but errors on zap .................................. chan_zap.c:8935: error: dereferencing pointer to incomplete type chan_zap.c:8936: error: dereferencing pointer to incomplete type chan_zap.c:8950: error: dereferencing pointer to incomplete type ..................................>On Sun, Nov 27, 2005 at 07:40:04PM -0800, Geo wrote: >> >> Well, thanks, it might be great your package yet I would like to know how to adapt. >> I wouldn't like to rewrite Debian neither Asterisk but is somebody able to advice >> how you define modules in "zconfig.h" or whatever ? >> Any tip ? >> Geo > >Why would you need to define modules? The package builds wcfxo. >What exactly do you try to do? > >-- >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >http://tzafrir.org.il | | a Mutt's >tzafrir@cohens.org.il | | best >ICQ# 16849755 | | friend >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
It should build wcfxo. Not trying anything special. I just follow the procedure ! When I reboot I have: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded !!!???? HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 I don't need ISDN, I do not configure any ISDN and I have no ISDN BRIstuffed or whatever !!!! Is ISDN susbsystem needed for using fxo devices using fxs signalling with Asterisk ? than Zapata Telephony Interface Registered on major 196 wcfxo: disagrees about version of symbol zt_receive wcfxo: Unknown symbol zt_receive wcfxo: disagrees about version of symbol zt_ec_chunk wcfxo: Unknown symbol zt_ec_chunk wcfxo: disagrees about version of symbol zt_transmit .................................. Testing modprobe zaptel => OK zaptel driver but not wcfxo and ztcfg -vvv Zaptel Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) Yet my config is OK. ============================================Installind Asterisk make install compiling OK but errors on zap .................................. chan_zap.c:8935: error: dereferencing pointer to incomplete type chan_zap.c:8936: error: dereferencing pointer to incomplete type chan_zap.c:8950: error: dereferencing pointer to incomplete type ..................................>On Sun, Nov 27, 2005 at 07:40:04PM -0800, Geo wrote: >> >> Well, thanks, it might be great your package yet I would like to know how to adapt. >> I wouldn't like to rewrite Debian neither Asterisk but is somebody able to advice >> how you define modules in "zconfig.h" or whatever ? >> Any tip ? >> Geo > >Why would you need to define modules? The package builds wcfxo. >What exactly do you try to do? > >-- >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >http://tzafrir.org.il | | a Mutt's >tzafrir@cohens.org.il | | best >ICQ# 16849755 | | friend >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
Hi, I've been using module assistant first time than using make linux26 seems OK now, meaning I still have PRI and hisax but in 2nd position and wcfxo OK. risk2:/usr/src/asterisk-1.2.0# lsmod | grep zaptel zaptel 228644 1 wcfxo crc_ccitt 2144 2 zaptel,hisax Halas, I still can not install asterisk, same errors 1: chan_zap.c:10906: error: dereferencing pointer to incomplete type chan_zap.c:10906: error: dereferencing pointer to incomplete type chan_zap.c:10907: error: dereferencing pointer to incomplete type chan_zap.c:10916: error: dereferencing pointer to incomplete type chan_zap.c:10917: error: dereferencing pointer to incomplete type chan_zap.c:10932: error: dereferencing pointer to incomplete type .............................. Any idea or is it my pci "voodoo" creating zombies :-)))) ?>Hi > >On Mon, Nov 28, 2005 at 04:35:34PM -0800, Geo wrote: >> >> It should build wcfxo. Not trying anything special. >> I just follow the procedure ! >> >> When I reboot I have: >> >> ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded !!!???? >> HiSax: Linux Driver for passive ISDN cards >> HiSax: Version 3.5 (module) >> HiSax: Layer1 Revision 2.46.2.5 >> HiSax: Layer2 Revision 2.30.2.4 >> HiSax: TeiMgr Revision 2.20.2.3 >> HiSax: Layer3 Revision 2.22.2.3 >> >> >> I don't need ISDN, I do not configure any ISDN and I have no ISDN BRIstuffed or whatever !!!! >> Is ISDN susbsystem needed for using fxo devices using fxs signalling with Asterisk ? >> > >What's this ISDN driver doing here? > >A look at lspci will show you: > > Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface > >But by now you already knowthat this line represents your X100P card >that hapens to have the same PCI ID as that TigerJet device. 'lspci -n' >will show that the actual device has vendor ID e159 and product ID 1 . >'grep e159 /lib/modules/`uname -r`/modules.pcimap' will show that a >number of zaptel modules look for devices with those vendor/product IDs >but with some specific subvendor IDs and that the hisax driver tries to >load "them all". > >hotplug uses that information (extracted from the modules at depmod >time) to load modules by bus IDs. Don't want it? blacklist it: > > echo hisax >> /etc/hotplug/blacklist.d/local > >Consider blacklisting other modules whose automatic modprobe seems >unnecessary/pointless in just the same way (or $EDITOR >/etc/hotplug/blacklist ) > >> >> than >> Zapata Telephony Interface Registered on major 196 >> wcfxo: disagrees about version of symbol zt_receive >> wcfxo: Unknown symbol zt_receive >> wcfxo: disagrees about version of symbol zt_ec_chunk >> wcfxo: Unknown symbol zt_ec_chunk >> wcfxo: disagrees about version of symbol zt_transmit > >This beats me: version mipatch between zaptel and wcfxo ? > >One possible guess: you installed everything from one place. And then >you compiled it again (without wcfxo this time) and reinstalled. > >Are you using m-a? > >> .................................. >> Testing >> >> modprobe zaptel => OK zaptel driver >> >> but not wcfxo >> >> and >> ztcfg -vvv >> >> Zaptel Configuration >> =====================>> >> Channel map: >> >> Channel 01: FXS Kewlstart (Default) (Slaves: 01) >> >> 1 channels configured. >> >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) > >Seems that wcfxo is not loaded. > > lsmod | grep zaptel > >> >> Yet my config is OK. >> ============================================>> Installind Asterisk >> >> make install >> compiling OK but errors on zap >> .................................. >> chan_zap.c:8935: error: dereferencing pointer to incomplete type >> chan_zap.c:8936: error: dereferencing pointer to incomplete type >> chan_zap.c:8950: error: dereferencing pointer to incomplete type >> .................................. >> >> >> >> >> >> >On Sun, Nov 27, 2005 at 07:40:04PM -0800, Geo wrote: >> >> >> >> Well, thanks, it might be great your package yet I would like to know how to adapt. >> >> I wouldn't like to rewrite Debian neither Asterisk but is somebody able to advice >> >> how you define modules in "zconfig.h" or whatever ? >> >> Any tip ? >> >> Geo >> > >> >Why would you need to define modules? The package builds wcfxo. >> >What exactly do you try to do? >> > >> >-- >> >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >> >http://tzafrir.org.il | | a Mutt's >> >tzafrir@cohens.org.il | | best >> >ICQ# 16849755 | | friend >> >_______________________________________________ >> >--Bandwidth and Colocation provided by Easynews.com -- >> > >> >Asterisk-Users mailing list >> >To UNSUBSCRIBE or update options visit: >> > http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> >> >> >> >> ___________________________________________________________________________ >> Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >> T?l?chargez cette version sur http://fr.messenger.yahoo.com >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > >-- >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >http://tzafrir.org.il | | a Mutt's >tzafrir@cohens.org.il | | best >ICQ# 16849755 | | friend >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
Hi, I've been using module assistant first time than using make linux26 seems OK now, meaning I still have PRI and hisax but in 2nd position and wcfxo OK. risk2:/usr/src/asterisk-1.2.0# lsmod | grep zaptel zaptel 228644 1 wcfxo crc_ccitt 2144 2 zaptel,hisax Halas, I still can not install asterisk, same errors 1: chan_zap.c:10906: error: dereferencing pointer to incomplete type chan_zap.c:10906: error: dereferencing pointer to incomplete type chan_zap.c:10907: error: dereferencing pointer to incomplete type chan_zap.c:10916: error: dereferencing pointer to incomplete type chan_zap.c:10917: error: dereferencing pointer to incomplete type chan_zap.c:10932: error: dereferencing pointer to incomplete type .............................. Any idea or is it my pci "voodoo" creating zombies :-)))) ?>Hi > >On Mon, Nov 28, 2005 at 04:35:34PM -0800, Geo wrote: >> >> It should build wcfxo. Not trying anything special. >> I just follow the procedure ! >> >> When I reboot I have: >> >> ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded !!!???? >> HiSax: Linux Driver for passive ISDN cards >> HiSax: Version 3.5 (module) >> HiSax: Layer1 Revision 2.46.2.5 >> HiSax: Layer2 Revision 2.30.2.4 >> HiSax: TeiMgr Revision 2.20.2.3 >> HiSax: Layer3 Revision 2.22.2.3 >> >> >> I don't need ISDN, I do not configure any ISDN and I have no ISDN BRIstuffed or whatever !!!! >> Is ISDN susbsystem needed for using fxo devices using fxs signalling with Asterisk ? >> > >What's this ISDN driver doing here? > >A look at lspci will show you: > > Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface > >But by now you already knowthat this line represents your X100P card >that hapens to have the same PCI ID as that TigerJet device. 'lspci -n' >will show that the actual device has vendor ID e159 and product ID 1 . >'grep e159 /lib/modules/`uname -r`/modules.pcimap' will show that a >number of zaptel modules look for devices with those vendor/product IDs >but with some specific subvendor IDs and that the hisax driver tries to >load "them all". > >hotplug uses that information (extracted from the modules at depmod >time) to load modules by bus IDs. Don't want it? blacklist it: > > echo hisax >> /etc/hotplug/blacklist.d/local > >Consider blacklisting other modules whose automatic modprobe seems >unnecessary/pointless in just the same way (or $EDITOR >/etc/hotplug/blacklist ) > >> >> than >> Zapata Telephony Interface Registered on major 196 >> wcfxo: disagrees about version of symbol zt_receive >> wcfxo: Unknown symbol zt_receive >> wcfxo: disagrees about version of symbol zt_ec_chunk >> wcfxo: Unknown symbol zt_ec_chunk >> wcfxo: disagrees about version of symbol zt_transmit > >This beats me: version mipatch between zaptel and wcfxo ? > >One possible guess: you installed everything from one place. And then >you compiled it again (without wcfxo this time) and reinstalled. > >Are you using m-a? > >> .................................. >> Testing >> >> modprobe zaptel => OK zaptel driver >> >> but not wcfxo >> >> and >> ztcfg -vvv >> >> Zaptel Configuration >> =====================>> >> Channel map: >> >> Channel 01: FXS Kewlstart (Default) (Slaves: 01) >> >> 1 channels configured. >> >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) > >Seems that wcfxo is not loaded. > > lsmod | grep zaptel > >> >> Yet my config is OK. >> ============================================>> Installind Asterisk >> >> make install >> compiling OK but errors on zap >> .................................. >> chan_zap.c:8935: error: dereferencing pointer to incomplete type >> chan_zap.c:8936: error: dereferencing pointer to incomplete type >> chan_zap.c:8950: error: dereferencing pointer to incomplete type >> .................................. >> >> >> >> >> >> >On Sun, Nov 27, 2005 at 07:40:04PM -0800, Geo wrote: >> >> >> >> Well, thanks, it might be great your package yet I would like to know how to adapt. >> >> I wouldn't like to rewrite Debian neither Asterisk but is somebody able to advice >> >> how you define modules in "zconfig.h" or whatever ? >> >> Any tip ? >> >> Geo >> > >> >Why would you need to define modules? The package builds wcfxo. >> >What exactly do you try to do? >> > >> >-- >> >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >> >http://tzafrir.org.il | | a Mutt's >> >tzafrir@cohens.org.il | | best >> >ICQ# 16849755 | | friend >> >_______________________________________________ >> >--Bandwidth and Colocation provided by Easynews.com -- >> > >> >Asterisk-Users mailing list >> >To UNSUBSCRIBE or update options visit: >> > http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> >> >> >> >> ___________________________________________________________________________ >> Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >> T?l?chargez cette version sur http://fr.messenger.yahoo.com >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > >-- >Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is >http://tzafrir.org.il | | a Mutt's >tzafrir@cohens.org.il | | best >ICQ# 16849755 | | friend >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
OK, fine, thanks. Now I have 1.0.9 still BRIstuffed-0.2.0-RC8h
"pre-built" don't know how with hisax harmless (eventhough
blacklisted), but all runs.
Halas, I have my initial problem. When I dial zap, I just get a continous dial
tone
example: exten => _9.,1,Dial(ZAP/1,${EXTEN:1})
and
CLI> Executing Dial("SIP/xxx-f70a", "ZAP/1|01XXXXXXXX")
in new stack
...............
If I debug I see that the interface is just "Setting hook state to 2, to 1,
to 0" but does not dial.
If I compose a number during this continous dial tone is ringing. So, I have to
recompose the number.
Remark: in RH with similar zaptel, zapata config was OK, just dialing.
Is there anything new like setting the hook state first, setting a timer, and
than dialing, ... or is it a problem ?
>On Tue, Nov 29, 2005 at 04:35:27PM -0800, Geo wrote:
>> Hi,
>> I've been using module assistant first time than using make linux26
seems OK now, meaning I still have PRI and hisax
>
>The module hisax is harmless. Ignore it. Black-list it (see my previous
>mail) if it bothers you ion the logs and start-time, but apart from
>that: nothing to worry about.
>
>> but in 2nd position and wcfxo OK.
>> risk2:/usr/src/asterisk-1.2.0# lsmod | grep zaptel
>> zaptel 228644 1 wcfxo
>> crc_ccitt 2144 2 zaptel,hisax
>> Halas, I still can not install asterisk, same errors 1:
>
>Good, so we've passed zaptel, and got to Asterisk. Seems like yo need to
>start providing more details here.
>
>And this seems like a good time as any to mention:
>
> echo "deb http://rapid.dotsrc.org/ unstable/" >>
/etc/apt/sources.list
> echo "deb http://rapid.dotsrc.org/ experimental/" >>
/etc/apt/sources.list
> apt-get update
> apt-get install asterisk
>
>Might actually even work...
>
>>
>> chan_zap.c:10906: error: dereferencing pointer to incomplete type
>> chan_zap.c:10906: error: dereferencing pointer to incomplete type
>> chan_zap.c:10907: error: dereferencing pointer to incomplete type
>> chan_zap.c:10916: error: dereferencing pointer to incomplete type
>> chan_zap.c:10917: error: dereferencing pointer to incomplete type
>> chan_zap.c:10932: error: dereferencing pointer to incomplete type
>>
>> ..............................
>> Any idea or is it my pci "voodoo" creating zombies :-)))) ?
>
>Hmmm..... what zombies?
>
>--
>Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is
>http://tzafrir.org.il | | a Mutt's
>tzafrir@cohens.org.il | | best
>ICQ# 16849755 | | friend
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
T?l?chargez cette version sur http://fr.messenger.yahoo.com