Diseyi Diffa
2005-Nov-23 12:23 UTC
[Asterisk-Users] How to connect a Cisco Router with FXO module to Asterisk
I need help connect Cisco router M3800 serries to asterisk this is my configuration has anyone done this I have done everything on the http://www.voip-info.org/wiki-Asterisk+cisco+FXO but I don't get any dial tone. Please help voice-port 1/1 input gain 10 output attenuation 10 no comfort-noise connection plar 1001 ! voice-port 1/2 connection plar 1001 ! voice-port 1/3 ! voice-port 1/4 ! voice-port 1/5 ! voice-port 1/6 ! dial-peer voice 100 pots application session destination-pattern 2.. port 1/1 ! dial-peer voice 10 voip destination-pattern 2... session protocol sipv2 session target sip-server codec g711ulaw bytes 80 ! dial-peer voice 411 pots destination-pattern 411 port 1/1 ! dial-peer voice 10 voip destination-pattern 2... session protocol sipv2 session target sip-server codec g711ulaw bytes 80 ! dial-peer voice 411 pots destination-pattern 411 port 1/1 prefix 411 ! gateway sip-ua retry invite 3 retry cancel 2 sip-server ipv4:192.168.1.1:5060 ! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051123/b4eb8aae/attachment.htm