asterisk users - Nov 2005 - TDM400p card problem

Hi,

I had this card working in an asterisk box, but switched it to a smaller one.

When I booted the new box, the card didn't work and all I got was this:


Freshmaker version: d9
00 != 19
01 != 19
02 != 19
03 != 19
...
...
...
fc != d9
fd != d9
fe != d9
Freshmaker failed register test
wctdm: probe of 0000:00:0c.0 failed with error -5


So I put the card back in the old system and didn't work either.
Any idea what went wrong? Is the card damaged or is there any chance to have 
it working again?



-- 
Best Regards,
Bruno Seoane

> Hi,
> 
> I had this card working in an asterisk box, but switched it to a
smaller
> one.
> 
> When I booted the new box, the card didn't work and all I got was
this:
> 
> 
> Freshmaker version: d9
> 00 != 19
> 01 != 19
> 02 != 19
> 03 != 19
> ...
> ...
> ...
> fc != d9
> fd != d9
> fe != d9
> Freshmaker failed register test
> wctdm: probe of 0000:00:0c.0 failed with error -5
> 
> 
> So I put the card back in the old system and didn't work either.
> Any idea what went wrong? Is the card damaged or is there any chance
to
> have
> it working again?
> 
> 
> 
> --
> Best Regards,
> Bruno Seoane

Did you use a grounded anti-static wrist strap when handling the card?
This is especially important if your area is cold and dry.

As for fixing it, try reseating the modules.  If that does not work,
possibly you can have it replaced by Digium.

Thanks,
Steve

There is posibility that you have damaged the card with static 
electricity. You should always make sure your hans are grounded to the 
chassis when touching cards.

Anyway,

Take some clean alhohol and wach all connector on the PCI card. Also 
remove the sub-cards and do the same. The connectors do collect a thin 
layer of dirt that migh make cause a card not to connect on all pin's etc.

jan

Bruno Seoane wrote:
>Hi,
>
>I had this card working in an asterisk box, but switched it to a smaller
one.
>
>When I booted the new box, the card didn't work and all I got was this:
>
>
>Freshmaker version: d9
>00 != 19
>01 != 19
>02 != 19
>03 != 19
>...
>...
>...
>fc != d9
>fd != d9
>fe != d9
>Freshmaker failed register test
>wctdm: probe of 0000:00:0c.0 failed with error -5
>
>
>So I put the card back in the old system and didn't work either.
>Any idea what went wrong? Is the card damaged or is there any chance to have
>it working again?
>
>
>
>  
>