AFAIK there were some known issues preventing call transfer from H323
terminals, at least with Innovaphone ones.
Yours
l.
On Fri, 18 Nov 2005 17:45:39 +0100, Santosh Rao
<santoshr@staff.ownmail.com> wrote:
> Hello list,
> We have asterisk v1.2.0 CVS head and ooh323 in place. calls
> can be made and recieved to and from extensions.
> How to implement call transfer and call pickup. when using asterisk
> 1.0.x dtmf=inband registers and sends dtmf but with asterisk 1.2 and
> ooh323 it does not.. is this a known issue ? While google heard tht
> there was a issue with chan_h323.so would not send inband so tried to
> install chan_0h323.so but but.. asterisk refuses to start with
> chan_oh323 it says "Unregistered channel type 'Modem'"
> my basic requirements are h323 , call pickup and call transfer? below
> attached are the configurations files tht we are using currently ...
>
> thanking for all your support ..
>
>
>
> Extensions.conf:-
> [testing]
> exten => _7.,1,Pickup({66}:1@testing)
> exten => 666,1,Dial(H323/192.168.1.194,100,Ttr)
> exten => 667,1,Dial(H323/192.168.1.195,100,Ttr)
> exten => 668,1,Dial(H323/192.168.1.196,100,Ttr)
> exten => 669,1,Dial(H323/192.168.1.192,100,Ttr)
>
> H323.conf:-
> [general]
> port = 1720
> bindaddr = 0.0.0.0 ; this SHALL contain a single, valid IP address for
> this machine
> disallow=all
> allow=ulaw
> allow=alaw
> ;dtmfmode=auto
> dtmfmode=inband
>
> gatekeeper = DISABLE
> context=testing
>
> [vivek]
> type=friend
> host=192.168.1.194
> context=testing
> Callgroup=1
> pickupgroup=1-9,13
>
> [santosh]
> type=friend
> host=192.168.1.195
> context=testing
> Callgroup=1
> pickupgroup=1-9,13
>
> [binu]
> type=friend
> host=192.168.1.196
> context=testing
> Callgroup=1
> pickupgroup=1-9,13
>
> [test1]
> type=friend
> host=192.168.1.192
> context=testing
> Callgroup=1
> pickupgroup=1-9,13
>
> Features.conf:-
>
> [general]
> parkext => 700 ; What ext. to dial to park
> parkpos => 701-720 ; What extensions to park calls on
> context => parkedcalls ; Which context parked calls are in
> pickupex = *8
>
> [featuremap]
> blindxfer => #1 ; Blind transfer
> atxfer => *2 ; Attended transfer
>
>
>
>
>
> "I haven't lost my mind; it's backed up on
> tape somewhere."
>
> Santosh Rao
> Trikon Electronics Pvt Ltd
>
>
--
Loway Research - Home of QueueMetrics
http://queuemetrics.loway.it