Is there some kind of limit to the number of TDM04B cards you can use in your Asterisk system (Red Hat 9, kernel 2.4, Asterisk CVS-v1-0-11-11/16/04-13:41:01))? I have 2 cards right now(rev B) with 8 analog lines connected to 8 FXO modules. I wanted to add 2 more analog lines but the third card (rev I) refuses to recognize the two new FXO modules. Digium have said their newer version TDM cards are backward-compatible. There is no problem with the PCI slot or IRQ. I'm using the motherboard (Asus P4P800-E) as recommended by Digium. Any ideas? Shaun Singh, Manager Travelwave 1655 Dufferin Street, Suite 201 Toronto, ON M6H 3L9 Tel: (416) 652-1212 Ext 101 Fax: (416) 652-7073 Website: www.travelwave.ca
Shaun Singh wrote:> Is there some kind of limit to the number of TDM04B cards you can use in > your Asterisk system (Red Hat 9, kernel 2.4, Asterisk > CVS-v1-0-11-11/16/04-13:41:01))? I have 2 cards right now(rev B) with 8 > analog lines connected to 8 FXO modules. I wanted to add 2 more analog lines > but the third card (rev I) refuses to recognize the two new FXO modules. > Digium have said their newer version TDM cards are backward-compatible. > There is no problem with the PCI slot or IRQ. I'm using the motherboard > (Asus P4P800-E) as recommended by Digium. Any ideas?Digium's TDM2400P is better suited to your configuration. Maybe ask Digium if they have some kind of trade in program? Regards, -- Jason Becker Director & CEO Coalescent Systems Inc. Enabling Open Source Telephony 403.244.8089 www.coalescentsystems.ca