What interface do you have in the asterisk box? Digium? Make model?
What does your /etc/zaptel look like?
What is your signalling set to in /etc/asterisk/zapata.conf (ie pri_cpe or
pri_net)?
What does the output of 'cat /proc/zaptel/* | grep Span' look like?
What is your PBX side interface (a 30PRTA or 30DTC+SC01?) -- just
interested, it shouldn't matter unless you are trying a QSIG interface...
Are you attempting calls from both directions, or just from the PBX?
If you are just attempting from the PBX, perhaps attempt a call from the
asterisk system. If you have no other devices you can use a softphone, or
we usually just throw a 'call' description file into
/var/spool/asterisk/outgoing that plays music on hold for a few minutes...
Cheers,
Peter
--
Peter Childs
NEC Business Solutions Ltd
Ph:61-8-8301-4908 Mb:61-4-0819-7693
IM: pjcinaus (yahoo)
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
pdhales@optusnet.com.au
Sent: Wednesday, 9 November 2005 11:56 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] NEC IPS PABX
We are here at a site trying to get an NEC IPS pabx to talk to an Asterisk
Box via E1.
We get a green light on the E1, but we can't see any call data moving
between the systems.
I have turned on all of the debugging there is, and we still see nothing.
Any ideas?
PaulH
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users