Andrew Kohlsmith
2005-Nov-05 13:07 UTC
[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance
On Saturday 05 November 2005 15:55, Dustin Goodwin wrote:> I have read a lot online about interrupt related cracking/popping noise > issues on Digium cards. The weird thing is I experience it with the FXO > port on my TDM card but not on the FXS. Does this make any sense? I had > assumed an interrupt problem. But if the FXS port is working why would > the FXO port be having a problem?Swap the ports... does it stay in the slot or does it follow the module? -A.
Dustin Goodwin
2005-Nov-05 13:55 UTC
[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance
I have read a lot online about interrupt related cracking/popping noise issues on Digium cards. The weird thing is I experience it with the FXO port on my TDM card but not on the FXS. Does this make any sense? I had assumed an interrupt problem. But if the FXS port is working why would the FXO port be having a problem? - Dustin -
Andrew Kohlsmith
2005-Nov-05 19:38 UTC
[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance
On Saturday 05 November 2005 22:33, Gary Eck wrote:> I have popping with FSO modules only on channel 1 - the other 3 channels > are clear.That was corrected a long time ago. You must have an older rev TDM400 carrier card. -A.
Andrew Kohlsmith
2005-Nov-05 20:32 UTC
[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance
On Saturday 05 November 2005 23:24, Dustin Goodwin wrote:> I do have an older card. I believe I purchased it before the FXO module > started shipping. Can I do anything to resolve or this hw problem with > the card?Contact Digium and get the carrier card replaced under warranty. -A.
I have popping with FSO modules only on channel 1 - the other 3 channels are clear. Moved slots, there are no shared interrupts, replaced the TDM400 card and all modules - still the same result. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Dustin Goodwin Sent: Saturday, November 05, 2005 4:01 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] TDM400 FXO vs FXS Interrupt performance I have read a lot online about interrupt related cracking/popping noise issues on Digium cards. The weird thing is I experience it with the FXO port on my TDM card but not on the FXS. Does this make any sense? I had assumed an interrupt problem. But if the FXS port is working why would the FXO port be having a problem? - Dustin - _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
"Brand new " cards, from a recommended Digium distributor. I spoke with Digium and the distributor tech support on it - gave them serial numbers, board rev numbers, etc. No one mentioned this. Do you know what the current version of the board is? Thanks!!!! -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith Sent: Saturday, November 05, 2005 10:45 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] TDM400 FXO vs FXS Interrupt performance On Saturday 05 November 2005 22:33, Gary Eck wrote:> I have popping with FSO modules only on channel 1 - the other 3 > channels are clear.That was corrected a long time ago. You must have an older rev TDM400 carrier card. -A. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Dustin Goodwin
2005-Nov-05 21:24 UTC
[Asterisk-Users] TDM400 FXO vs FXS Interrupt performance
I do have an older card. I believe I purchased it before the FXO module started shipping. Can I do anything to resolve or this hw problem with the card? - Dustin - Andrew Kohlsmith wrote:>On Saturday 05 November 2005 22:33, Gary Eck wrote: > > >>I have popping with FSO modules only on channel 1 - the other 3 channels >>are clear. >> >> > >That was corrected a long time ago. You must have an older rev TDM400 carrier >card. > >-A. >_______________________________________________ >--Bandwidth and Colocation sponsored by Easynews.com -- > >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >