Hello! A couple of weeks ago I mentioned echo issues I was having. It turns out that the echo was only happening for the first 30 seconds or so, so the echo cancellers *were* working, just not training well. I wish they had told me that 2 weeks ago! So, over the weekend, I made two changes: 1) Updated to latest CVS HEAD (from about 3-4 weeks ago), BUT left KB1 as the echo canceller I actually thought I had updated it to MG2, but when I checked zconfig.h, it looks like I didn't! 2) Changed echotraining=yes to echotraining=800 And for the last two days, the users have reported no echo. They are much happier. I thought I'd share. Now, I have a *bad* distortion problem. I will put that in a separate e-mail. Tim Massey -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051101/e643d0a2/attachment.htm
asterisk-users-bounces@lists.digium.com wrote on 11/01/2005 09:05:22 PM:> > Hello! > > A couple of weeks ago I mentioned echo issues I was having. It > turns out that the echo was only happening for the first 30 seconds > or so, so the echo cancellers *were* working, just not training > well. I wish they had told me that 2 weeks ago! So, over the > weekend, I made two changes: > > 1) Updated to latest CVS HEAD (from about 3-4 weeks ago), BUT left > KB1 as the echo canceller > I actually thought I had updated it to MG2, but when I > checked zconfig.h, it looks like I didn't!This has now been upgraded to MG2. Users have reported no change: no echo before, no echo now.> 2) Changed echotraining=yes to echotraining=800I think this was the one the fixed it for real. Tim Massey -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051103/da6fcb99/attachment.htm