Andrea Riela
2005-Nov-01 04:25 UTC
[Asterisk-Users] problem with CME on 12.3(11)T6 and later (MWI)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, my topology: CME (cisco callmanager express 12.3(14)T4 on 1751v): 192.168.17.1 Asterisk (1.0.9 on Freebsd 5.4): 192.168.17.10 from 12.3(11)T6 and later CME sends <num>$ and not <num> only on sip trunks. See the 'sh sip reg status': barahir#sh sip reg stat Line peer expires(sec) registered ============ ============= ============ ==========.* 110 2314 yes 601$ 20001 2314 yes 603$ 20004 2314 yes 604$ 20006 2314 yes 9* 120 2314 yes well, on my * sip.conf I've to use [601$], [603$] and so on. No problems with call forwarding, voicemail, etc ... but now (after changing sip.conf and extensions.conf for this IOS behavior) the MWI unsolicited doesn't work (maybe for something like http://home.comcast.net/~kurtwp2/cme/asterisk_notify_bug.htm , as Kurt Pasewaldt says). Have you got any advice for me? this is my IOS conf: ! sip-ua set pstn-cause 6 sip-status 503 set pstn-cause 18 sip-status 408 set pstn-cause 27 sip-status 502 set pstn-cause 31 sip-status 480 set pstn-cause 44 sip-status 503 set pstn-cause 58 sip-status 503 set pstn-cause 88 sip-status 503 set pstn-cause 95 sip-status 503 set pstn-cause 102 sip-status 504 set pstn-cause 111 sip-status 500 retry invite 4 retry response 4 retry bye 4 retry cancel 4 registrar ipv4:192.168.17.10 expires 3600 sip-server ipv4:192.168.17.10 ! telephony-service ... voicemail 5699 mwi sip-server 192.168.17.10 unsolicited ! dial-peer voice 310 voip description Nesys VMS through Asterisk destination-pattern 56.. redirect ip2ip voice-class codec 1 session protocol sipv2 session target ipv4:192.168.17.10 dtmf-relay rtp-nte no vad ! ephone-dn 1 dual-line number 601 secondary 123456 no-reg ... call-forward noan 5601 timeout 20 ! this is the 'sip debug' from *: http://www.nesys.it/snap/asterisk_debug Thanks for your support Regards Andrea -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) iD8DBQFDZ1CSMakHrsrHP9wRAmOHAJ0Q2MrzKC9nShV+T2UQawRprGhdpgCfdRIX CdRJqryGwj/V6iubxvNwo1E=UHQz -----END PGP SIGNATURE-----
Andrea Riela
2005-Nov-01 05:00 UTC
[Asterisk-Users] problem with CME on 12.3(11)T6 and later (MWI)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 mmm .... a solution is maybe something like that? http://mail.iptel.org/pipermail/serusers/2005-May/019677.html Regards Andrea -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) iD8DBQFDZ1jPMakHrsrHP9wRAgJXAJkBwg2ubs8H1w+BvdRJd7d/YJzvTQCfVY10 vwc/bG1TI2n/3PVZuMchyRY=vsmN -----END PGP SIGNATURE-----