Hi I have a Sipura SPA 2000 unit and I have configured both the lines in the unit. both the lines are configured to use 729. when I make calls from the lines independently it works great. no problem at all. when line 1 is connected and when I try to make a call using line 2 while line 1 is connected I get codec error. what could be the problem , please help. I tried this with call the other codecs as well, i still get the same error, only when i am tring to make the second active call regards kanishka
Hello You cannot have two g729 calls You can have one g729 and one g711 at same time regards Thierry asterisk@widevoip.com Tel : +33 (0)3 90 40 06 75 Fax: +33 (0)3 90 40 06 76 http://www.widevoip.com> -----Message d'origine----- > De : asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] De la part > de Kanishka Somaratne > Envoy? : vendredi 28 octobre 2005 11:15 > ? : asterisk-users@lists.digium.com > Objet : [Asterisk-Users] Problem With Sipura > > Hi > I have a Sipura SPA 2000 unit and I have configured both the > lines in the unit. both the lines are configured to use 729. > > when I make calls from the lines independently it works > great. no problem at all. > > when line 1 is connected and when I try to make a call using > line 2 while line 1 is connected I get codec error. > > what could be the problem , please help. > > I tried this with call the other codecs as well, i still get > the same error, only when i am tring to make the second active call > > regards > kanishka > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
> Hi > I have a Sipura SPA 2000 unit and I have configured both the lines in the > unit. both the lines are configured to use 729. > > when I make calls from the lines independently it works great. no problem at > all. > > when line 1 is connected and when I try to make a call using line 2 while > line 1 is connected I get codec error. > > what could be the problem , please help. > > I tried this with call the other codecs as well, i still get the same error, > only when i am tring to make the second active callIf you read the sipura documentation, you'll note they tell you the spa products will only support "one" g729 conversation at a time. Supposedly, that's because of the heavy processing requirements associated with g729 and the limited processing cycles in the spa products. Use a different codec on the spa and things will work.