Yes, many people have had this problem.
Check the mailing list archives... I think the newest code has the fix.
Workaround for older versions is to Answer before Dial, but you may still
need the 'r' option to Dial as ringing may stop for the caller after
about
10 seconds.
On 10/27/05, OTR Comm <otrcomm@isp-systems.net>
wrote:>
> Hello all,
>
> I have a problem calling into asterisk on a PRI going out to a SIP phone
> (PRI -> SIP). The calling party does not hear ringing and after about
five
> seconds gets an *All circuits are busy* recording. However, the called SIP
> phone does ring, and if the called party answers the phone within a few
> seconds, the call stays in service.
>
> CLI messages:
>
> ...
> -- Accepting call from '9288532045' to '6023432727' on
channel 0/23,
> span 1
> -- Executing Dial("Zap/23-1", "SIP/102|20|rt") in new
stack
> -- Called 102
> !! Don't know how to add an IE High-layer Compatibility (125)
> !! Unable to add IE 'High-layer Compatibility'
> -- SIP/102-935d is ringing
> -- Channel 0/23, span 1 got hangup request
> == Spawn extension (incoming, 6023432727, 1) exited non-zero on
'Zap/23-1'
> -- Hungup 'Zap/23-1'
> ...
>
> NOTE: There is no problem calling from SIP phone out (SIP -> PRI).
>
>
> Any body ever have this problem?
>
> Thanks,
> Murrah
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com
<http://Easynews.com>--
>
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051027/ecfbe029/attachment.htm