Administrator
2005-Oct-27 10:33 UTC
[Asterisk-Users] cannot get dialtone or ring on FXS ports (TDM400p)
Just added a TDM400p with 2 fxs ports to asterisk so that I could hook up our fax lines, ztcfg shows the card being detected and configured correctly (fxo_ks signalling) Zapata.conf [channels] context=incoming signalling=pri_cpe switchtype=national echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 channel => 1-12 context=analogint signalling=fxo_ks language=en group=2 channel => 15-16 also "zap show channel 15" shows no problems, likewise with "zap show status" slots 3&4 on the card are populated... dialing the channels produces no rings, and no errors no dialtone. the card used to have fxo modules (I switched them) aux power connector is attached. I'm stuck, any help would be appreciated. Thanks, Jay Bhatt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051027/ac6a46da/attachment.htm