I am using a A104 Sangoma card. We are runningasterisk cvs head on our production box.After wanpipe configuration I am receiving the below mentioned error. pri show span looks good as below. pri show span 1 Primary D-channel: 24 Status: Provisioned, In Alarm, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 error on the server: Write to 33 failed: Bad address Short write: 0/5 (Bad address) Any help appreciated. Thank you,
Have you tried Asterisk 1.2beta1? does it work under that release? We have been using an a104u with PRIs on 1.2b1 for about 6 weeks now with no problems. MATT--- On 10/25/05, Sharon <asteriskgirl@gmail.com> wrote:> I am using a A104 Sangoma card. We are runningasterisk cvs head on our > production box.After wanpipe configuration I am receiving the below > mentioned error. > pri show span looks good as below. > > pri show span 1 > Primary D-channel: 24 > Status: Provisioned, In Alarm, Down, Active > Switchtype: National ISDN > Type: CPE > Window Length: 0/7 > Sentrej: 0 > SolicitFbit: 0 > Retrans: 0 > Busy: 0 > Overlap Dial: 0 > T200 Timer: 1000 > T203 Timer: 10000 > T305 Timer: 30000 > T308 Timer: 4000 > T313 Timer: 4000 > N200 Counter: 3 > > error on the server: > > Write to 33 failed: Bad address > Short write: 0/5 (Bad address) > > > Any help appreciated. > Thank you, > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Have you tried contacting Sangoma technical support? They are likely the best equipped to support the card and the alarm you're receiving. On 10/25/05, Sharon <asteriskgirl@gmail.com> wrote:> > I am using a A104 Sangoma card. We are runningasterisk cvs head on our > production box.After wanpipe configuration I am receiving the below > mentioned error. > pri show span looks good as below. > > pri show span 1 > Primary D-channel: 24 > Status: Provisioned, In Alarm, Down, Active > Switchtype: National ISDN > Type: CPE > Window Length: 0/7 > Sentrej: 0 > SolicitFbit: 0 > Retrans: 0 > Busy: 0 > Overlap Dial: 0 > T200 Timer: 1000 > T203 Timer: 10000 > T305 Timer: 30000 > T308 Timer: 4000 > T313 Timer: 4000 > N200 Counter: 3 > > error on the server: > > Write to 33 failed: Bad address > Short write: 0/5 (Bad address) > > > Any help appreciated. > Thank you, > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>-- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051025/37a85d57/attachment.htm
Are you using the newest drivers from Sangoma? There was an update due to the revision in asterisk/zaptel and the patch point was modified by Sangoma. If you used CVS to obtain the latest Zaptel / or used the latest A104 drivers without the latest CVS, the patch point is wrong and Sangoma compiled wrong. Besides shouldn't it be type 2 national. Not sure if that's an option, but when I compile, I use the option 3 and the pri only needs the channels and the d chan specified. So I never noticed if it said type 2. :) Paul -----Original Message----- From: Sharon [mailto:asteriskgirl@gmail.com] Sent: Tuesday, October 25, 2005 10:37 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Sangoma A104 errors I am using a A104 Sangoma card. We are runningasterisk cvs head on our production box.After wanpipe configuration I am receiving the below mentioned error. pri show span looks good as below. pri show span 1 Primary D-channel: 24 Status: Provisioned, In Alarm, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 error on the server: Write to 33 failed: Bad address Short write: 0/5 (Bad address) Any help appreciated. Thank you,