Hi all, I'm having a problem with some E1 lines I have from the Telco. They have told me that I should be able to specify the outgoing caller id in an AREA + NUMBER format (e.g. 14401806 for my Irish number +353 1 440 1806) but this does not appear to work for me (and either does any other apparent combinations of caller Id that I've tried. The outgoing number is just defaulting to one phone number assigned to the E1 line. Is there any settings relating to Setting the caller id in /etc/asterisk/zapata.conf or /etc/zaptel.conf or do you think this is a Telco problem? (I'm holding off complaining yet again to the Telco until I'm sure the problem isn't mine!. I have "usecallerid=yes" and "hidecallerid=no" set in /etc/asterisk/zapata.conf I have no problem setting the caller Id and using a VOIP termination company to set the caller id - the problem is only with my E1 lines. Thanks for any help! Derek -- Derek Conniffe Rivertower Ltd DID Number: 01 440 1806 (International: 00 353 1 440 1806) Ireland: (Freephone) 1800 719 400 Ireland: (Local) 01 440 1800 United Kingdom: 0870 068 2368 International: 00 353 1 440 1800 Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86 856 3823) Fax: 01 201 0085 (International: 00 353 1 201 0085) Email: Derek@rivertower.ie Web: http://www.rivertowerhosting.com -------------- next part -------------- A non-text attachment was scrubbed... Name: derek.vcf Type: text/x-vcard Size: 487 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051020/6fba6b57/derek.vcf