Hello List! I would like to integrate a Asterisk box in my current (german) telephone setup. Right now it looks like this: Provider --> DSL/ISDN Splitter --> Telephone-System(Box) or TK-Anlage ;) I have read that you can put Asterisk between my Splitter and the Telephone-System-Box, so that for the beginning asterisk will just forward the incoming and outgoing calls. The rest of the original Telephone Setup should stay the same. I "think" i will need a TDM400P for this. On the FXO Port i will have to plug in the telephone line coming from my DSL/ISDN Splitter. Is this correct so far? If yes, how do i get from here to my Telephone-System(Box) also known as TK-Anlage.(whats TK-Anlage translated correctly?) Thanks, Mario
asterisk@bortal.de schrieb:> Hello List! > > I would like to integrate a Asterisk box in my current (german) telephone > setup. Right now it looks like this: > > Provider --> DSL/ISDN Splitter --> Telephone-System(Box) or TK-Anlage ;) > > I have read that you can put Asterisk between my Splitter and the > Telephone-System-Box, so that for the beginning asterisk will just forward > the incoming and outgoing calls. The rest of the original Telephone Setup > should stay the same. > > I "think" i will need a TDM400P for this.Depends on your current PBX (TK-Anlage). If it is connected to regular ISDN line (Mehrger?teanschluss) you need a BRI-type ISDN card (Fritz or HFC-S, if you need more lines, quadbri or octobri come to mind). -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA