asterisk users - Aug 2005 - TE205P installation problem - ZT_SPANCONFIG failed on span 1

I have installed a new TE205P in my asterisk server.  When I reboot the
box the error " ZT_SPANCONFIG failed on span 1: No such device or
address (6)"

When I "modprobe wct2xxp" and run "ztcfg -vvv"  loads
everything
correctly. So it seems that it is not loading wct2xxp at boot.

I then added the following to "/etc/rc.d/init.d/zaptel" with no
success

MODULES="torisa tor2 wct4xxp wct1xxp wcfxo wcfxs wcusb wcte11xp
wct2xxp"
RMODULES="wcusb wcfxs wcfxo wct1xxp wct4xxp tor2 torisa wcte11xp
wct2xxp"


How do I get this to load the card correctly at boot?

Thanks for any help

Rich

Cavanna, Richard wrote:
> I have installed a new TE205P in my asterisk server.  When I reboot the
> box the error " ZT_SPANCONFIG failed on span 1: No such device or
> address (6)"
Please contact Digium tech support, they will help you with your 
installation.

have you checked if the card is recognized by the kernel
...loaded the needed module for the card

to see which modules are actually loaded: lsmod
to see which pci-cards are recognized by the kernel: lspci
...the digium cards are usually detected as an unknown network device

the needed module should be "wct2xxp" - maybe wct4xxp will do this as
well
modules should be installed within /lib/modules/YOUR_KERNEL_VERSION/misc/

++++ Wichtige Vorabinformation ++++
b&w computer bezieht am 01.09.2005 neue Gesch?ftsr?ume. Unsere neue
Adresse+Rufnummer:
b&w computer
Fangdieckstr. 64
(1. Stock)
22547 Hamburg
T: +49 40 / 49 296 - 0
F: +49 40 / 49 296 - 100

Checked modules and wct4xxp and zaptel are loaded. (if you check the makefile
wct2xxp is an alias for wct4xxp)

Then did a lspci and it is not sharing any IRQs

Now I am doing a zttest and it hangs on " Opened pseudo zap interface,
measuring accuracy..."

Richard 
------------------------------


have you checked if the card is recognized by the kernel
...loaded the needed module for the card

to see which modules are actually loaded: lsmod
to see which pci-cards are recognized by the kernel: lspci
...the digium cards are usually detected as an unknown network device

the needed module should be "wct2xxp" - maybe wct4xxp will do this as
well
modules should be installed within /lib/modules/YOUR_KERNEL_VERSION/misc/

++++ Wichtige Vorabinformation ++++
b&w computer bezieht am 01.09.2005 neue Gesch?ftsr?ume. Unsere neue
Adresse+Rufnummer:
b&w computer
Fangdieckstr. 64
(1. Stock)
22547 Hamburg
T: +49 40 / 49 296 - 0
F: +49 40 / 49 296 - 100 

------------------------------