Tim P
2005-Aug-05 09:20 UTC
[Asterisk-Users] Need Help Troubleshooting Broadvoice Connection
Ok I can register with BV fine (as far as I can tell from asterisk - see below). I am able to make outgoing calls but all incoming calls get a fast busy. I have opened and forwarded the following ports to my pbx: 5060-5063 UDP + TCP 69 UDP (BV claims they need this) 10000-20000 UDP I tried switching proxies as well, tried both LAX and CHI with the same problem. Called BV they said they can conenct andd call it with a softphone so it must be a configuration issue. Here are some outputs that might be helpful: Asterisk -r sip show registry asterisk1*CLI> Host Username Refresh State sip.broadvoice.com:5060 2068660133@s 23 Registered asterisk1*CLI> sip show peers asterisk1*CLI> Name/username Host Dyn Nat ACL Mask Port Status bv/2068660133 147.135.12.128 N 255.255.255.255 5060 Unmonitored 1111/1111 (Unspecified) D 255.255.255.255 0 Unmonitored 1005/1005 (Unspecified) D 255.255.255.255 0 Unmonitored 1004/1004 (Unspecified) D 255.255.255.255 0 Unmonitored 1003/1003 (Unspecified) D 255.255.255.255 0 Unmonitored 1002/1002 (Unspecified) D 255.255.255.255 0 Unmonitored [Kasterisk1*CLI> sip show peer bv asterisk1*CLI> * Name : bv Secret : <Set> MD5Secret : <Not set> Context : from-pstn Language : FromUser : 2068660133 FromDomain : sip.broadvoice.com Callgroup : (0) Pickupgroup : (0) Mailbox : LastMsgsSent : -1 Dynamic : No Expire : -1 seconds Expiry : 900 Insecure : Very Nat : Always ACL : No CanReinvite : No PromiscRedir : No DTMFmode : inband LastMsg : 0 ToHost : sip.broadvoice.com Addr->IP : 147.135.12.128 Port 5060 Defaddr->IP : 0.0.0.0 Port 0 Username : 2068660133 Codecs : 0xc (ulaw|alaw) Codec Order : (ulaw|alaw) Status : UNKNOWN Useragent : Full Contact : (not sure about that Status = UNKNOWN, is that a problem?) Get full output on outgoing calls and they connect sucessfully Get zero output on incoming calls, pbx never seem to get them Here is my sip.conf register=2068660133@sip.broadvoice.com:mypass:2068660133@sip.broadvoice.com [sip.broadvoice.com] username=2068660133 user=2068660133 type=user secret=mypass nat=yes insecure=very host=sip.broadvoice.com fromdomain=sip.broadvoice.com dtmfmode=inband dtmf=inband context=from-pstn authname=2068660133 Any ideas?
Ariel Batista
2005-Aug-05 11:31 UTC
[Asterisk-Users] Need Help Troubleshooting Broadvoice Connection
Tim P wrote: register=2068660133@sip.broadvoice.com:mypass:2068660133@sip.broadvoice.com/2068660133 You need to add the number to the back so you can route it with asterisk.> Ok I can register with BV fine (as far as I can tell from asterisk - > see below). I am able to make outgoing calls but all incoming calls > get a fast busy. > > I have opened and forwarded the following ports to my pbx: > 5060-5063 UDP + TCP > 69 UDP (BV claims they need this) > 10000-20000 UDP > > I tried switching proxies as well, tried both LAX and CHI with the > same problem. Called BV they said they can conenct andd call it with > a softphone so it must be a configuration issue. > > Here are some outputs that might be helpful: > > Asterisk -r > sip show registry > > asterisk1*CLI> > Host Username Refresh State > sip.broadvoice.com:5060 2068660133@s 23 Registered > > asterisk1*CLI> sip show peers > > asterisk1*CLI> > Name/username Host Dyn Nat ACL Mask Port > Status > bv/2068660133 147.135.12.128 N 255.255.255.255 5060 > Unmonitored > 1111/1111 (Unspecified) D 255.255.255.255 0 > Unmonitored > 1005/1005 (Unspecified) D 255.255.255.255 0 > Unmonitored > 1004/1004 (Unspecified) D 255.255.255.255 0 > Unmonitored > 1003/1003 (Unspecified) D 255.255.255.255 0 > Unmonitored > 1002/1002 (Unspecified) D 255.255.255.255 0 > Unmonitored > > [Kasterisk1*CLI> sip show peer bv > > asterisk1*CLI> > > > * Name : bv > Secret : <Set> > MD5Secret : <Not set> > Context : from-pstn > Language : > FromUser : 2068660133 > FromDomain : sip.broadvoice.com > Callgroup : (0) > Pickupgroup : (0) > Mailbox : > LastMsgsSent : -1 > Dynamic : No > Expire : -1 seconds > Expiry : 900 > Insecure : Very > Nat : Always > ACL : No > CanReinvite : No > PromiscRedir : No > DTMFmode : inband > LastMsg : 0 > ToHost : sip.broadvoice.com > Addr->IP : 147.135.12.128 Port 5060 > Defaddr->IP : 0.0.0.0 Port 0 > Username : 2068660133 > Codecs : 0xc (ulaw|alaw) > Codec Order : (ulaw|alaw) > Status : UNKNOWN > Useragent : > Full Contact : > > (not sure about that Status = UNKNOWN, is that a problem?) > > Get full output on outgoing calls and they connect sucessfully > Get zero output on incoming calls, pbx never seem to get them > > Here is my sip.conf > register=2068660133@sip.broadvoice.com:mypass:2068660133@sip.broadvoice.com > > [sip.broadvoice.com] > username=2068660133 > user=2068660133 > type=user > secret=mypass > nat=yes > insecure=very > host=sip.broadvoice.com > fromdomain=sip.broadvoice.com > dtmfmode=inband > dtmf=inband > context=from-pstn > authname=2068660133 > > Any ideas? > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users