Hi, I installed a Quadbri card, configured with 2 ports connected to a Hipath pbx an 2 ports connected to telco. I can make and receive call but I receive every 5 seconds on asterisk cli the message: "No D-channel available Using Primary on channel aniway 12 Primary D-channel on span 4 up" My zapata.conf [channels] switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 usecallingpres=yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 context=isdn-incoming group = 1 immediate=no signalling = bri_cpe channel => 1-2 channel => 10-11 context=pbx-incoming group = 2 immediate=no signalling = bri_net channel => 4-5 channel => 7-8 zaptel.conf loadzone=it defaultzone=it # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050722/4493008c/attachment.htm