Can't get a Digium TDM04B working. Asterisk is running. I seem to have setup the trunks OK. But whenever I make an outgoing call get the 'all circuits are busy now' message. If I call in nothing happens at all! Here is my zapata.conf file: ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-pstn signalling=fxs_ks fxsks=1-4 rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include AMP configs #include zapata_additional.conf ;Include genzaptelconf configs #include zapata-auto.conf What am I doing wrong? Angus Comber angus@NOSPAMiteloffice.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050620/4e977642/attachment.htm