Yes the most efficient way would be to put a t1 between your asterisk
system and the sx200 and set up DID & 2Way Trunk lines between the two on
those channels.
In asterisk you would set up the dial plan to send 1XX, 2XX, 3XX to the DID
trunks and redial the EXTENSION as the DID number on trunks assigned as
DID's to the SX200. On the SX200 use the ARS system to use 7 as an access
number for the two way trunk group to the astrerisk system, and have it
redial out the number, and asterisk would just process the incoming digits
as normal.
Other than that you could set up analog DID lines for calls into the SX200
from the asterisk system, and just regular analog lines to do the same
thing.
----------
From: Chris Mason (Lists)[SMTP:lists@masonc.com]
Reply To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Friday, May 06, 2005 8:53 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Mitel SX200 integration
I am changing one a resort over from a SX200 with digital phones to
Asterisk
with Polycom phones. The office can be changed over immediately but the
guest's villas can't until we do some rewiring, and that will be villa
by
villa as they are available.
How can I merge Asterisk into the existing installation? For example, I
would like to have extensions 7XX be on Asterisk while 1XX, 2XX, and 3XX
are on the mitel. Any ideas?
Chris Mason
NetConcepts
(264) 497-5670 Fax: (264) 497-8463
Int: (305) 704-7249 Fax: (815)301-9759
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users