asterisk users - May 2005 - Re: Sangoma A102 cards testing FIXED

Hi all!

 I have got same problem with Sangoma A102 and didn't get how did you
fix a problem? Can anybody explain?

> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Vikram
> Rangnekar
> Sent: Tuesday, February 15, 2005 1:59 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Re: Sangoma A102 cards testing FIXED
> 
> Its fixed and working great.
> > 
> > I was working on the dma issue that nenad pointed out and when i
tried 
> > to hdparm -d 1 /dev/hda my harddisk i got a permissioned denied
error 
> > (I was root) So i started researching a bit more and realised that 
> > since i have a sata hdd and running it in IDE mode i cant start dma
so 
> > i just recompiled the kernel with sata drivers and scsi activated
then 
> > i change the bio SATA setting to SATA ENHANCED (nothing else seems
to 
> > work) and changed the root=/dev/hda2 to
> > root=/dev/sda2 in the kernel boot options and i was on my way. now 
> > when i tierd hdparm -d 1 /dev/sda i was told that scsi dosent have
dma 
> > so it didnt matter.
> > 
> > Next i started the wanpipe drivers and started asterisk i didnt get 
> > any errors so to test th config i used
> > 
> > exten => 111,1,Dial(Zap/g1/301)
> > exten => 111,2,Hangup
> > 
> > and dialed that extension 111 and the extension 301 rang. i had 
> > started pri intense debugging and used show channels to make sure
the 
> > call went over the e1 channels.
> > 
> > i'm still testing it, it seems to be working great right now only 
> > error i got was a FCS BAD or somthing like that once.
> > 
> > My motherboard is a SuperMicro P4SCI just for your information.
> 

br,
dmitry

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050506/c525ec42/attachment.htm

> I have got same problem with Sangoma A102 and didn't get how did you
fix a
problem? Can anybody explain?

 

I have been working with Sangoma on a A101 installation and the fixes they
came up with will be rolled into a new beta they are releasing in the next
day or two. One thing I found out was you must stop the Zaptel modules
loading, wanrouter will load zaptel at startup.

Chris Mason
www.anguillaguide.com
Tel:  (305) 704-7249 Fax: (815)301-9759 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050506/b6519838/attachment.htm