Hi
I have a problem in that every time i try to dial a number i get the
error back that the number is unassigned (from an intense debug):
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1),
class = Normal Event (0) ]
Is there a way in which i can see what number is being sent to the PRI?
The full intense debug is below:
> Protocol Discriminator: Q.931 (8) len=33
> Call Ref: len= 2 (reference 6/0x6) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: S
peech (0)> Ext: 1 Trans mode/rate: 64kbps,
circuit-mode
(16
)> Ext: 1 User information layer 1: A-Law
(35)> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan:
0> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3> Ext: 1 Channel: 1 ]
> [6c 02 00 c3]
> Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Unknown N
umber Plan (0)> Presentation: Number not available (67)
'' ]
> [70 0b c1 30 38 30 30 38 30 30 31 35 32]
> Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telepho
ny Numbering Plan (E.164/E.163) (1) '0800800152'
]> [a1]
> Sending Complete (len= 1)
-- Called g1/0800800152
pbx*CLI>
< [ 00 01 01 22 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 017 P/F: 0
< 0 bytes of data
-- ACKing all packets from 15 to (but not including) 17
-- ACKing packet 16, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
pbx*CLI>
< [ 02 01 28 22 08 02 80 06 02 18 03 a9 83 81 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 020 0: 0
< N(R): 017 P: 0
< 10 bytes of data
-- ACKing all packets from 16 to (but not including) 17
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 6/0x6) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan:
0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel
Type: 3
< Ext: 1 Channel: 1 ]
Sending Receiver Ready (21)
> [ 02 01 01 2a ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 021 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
pbx*CLI>
< [ 02 01 2a 22 08 02 80 06 45 08 02 82 81 1e 02 82 88 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 021 0: 0
< N(R): 017 P: 0
< 13 bytes of data
-- ACKing all packets from 16 to (but not including) 17
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 6/0x6) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 82 81]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Pub
lic network serving the local user (2)
< Ext: 1 Cause: Unallocated (unassigned) number (1),
class = N
ormal Event (0) ]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0)
0: 0
Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information
or appropriate pattern now available. (8) ]
Sending Receiver Ready (22)
> [ 02 01 01 2c ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 022 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/1, span 1 got hangup request
pbx*CLI> > [ 00 01 22 2c 08 02 00 06 4d 08 02 81 81 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 017 0: 0
> N(R): 022 P: 0
> 9 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 6/0x6) (Originator)
> Message type: RELEASE (77)
> [08 02 81 81]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1),
class = Normal Event (0) ]
-- Hungup 'Zap/1-1'
--
Dan Goscomb <dang@cashcade.co.uk>