It seems this is a redundant question (or at least problem) within this group, but I'm unable to find a solution/combination. I have 3 30 button VIP phones running behind 3 different firewalls/servers (NAT) My asterisk server is running great with a public IP address (no NAT) The 30 button phone work fine to a point (load, register, date&time, and process calls to and from) but Only get one way audio, and my skinny debug shows the internal ip address (10.x.x.x) rtp session packets leaving (attempting, firewalled) to leave my server. Which geek nob do I need to turn to get my server to initiate the rtp on the public address... I've tried the nat=yes (and no...) statement in the skinny.conf tried host=dynamic host= (ip address) [billvip] device=SEP00D0BA8477CC version=P00203010003 context=default line => 1313 nat=yes host=24.159.111.193 callerid="Bill VIP30" <1313> mailbox=1313 tried nat in the sip.conf? [general] context=default ; Default context for incoming calls port=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ; Enable DNS SRV lookups on outbound calls nat=yes Using: chan_skinny.so that came with the Asterisk 1.0.7 dist. PS x-lite clients work fine Anyone who can help a thousand thank you's in advance !!!!!! Bill Coward, MSCE, CCNP, CISSP, CCSE, SCSA Sr. Network Engineer Graphic Packaging International
Eric Wieling aka ManxPower
2005-May-03 08:54 UTC
[Asterisk-Users] 30 button vip 1 way audio
Bill Coward wrote:> It seems this is a redundant question (or at least problem) within > this group, but I'm unable to find a solution/combination. > > I have 3 30 button VIP phones running behind 3 different firewalls/servers (NAT) > > My asterisk server is running great with a public IP address (no NAT) > > The 30 button phone work fine to a point (load, register, date&time, > and process calls to and from) but > > Only get one way audio, and my skinny debug shows the internal ip > address (10.x.x.x) rtp session packets leaving (attempting, > firewalled) to leave my server. Which geek nob do I need to turn to > get my server to initiate the rtp on the public address... > > I've tried the nat=yes (and no...) statement in the skinny.conf tried > host=dynamic host= (ip address)As I understand it, chan_skinny does not support phones behind NAT.