I just installed a HFC-based ISDN card, and I'm having problems with
making dialouts using that card. Dial-ins are working fine - i.e. I can
call myself and talk to asterisk :)
I have defined an extension:
exten => _0.,1,Dial(Zap/0/${EXTEN:1})
exten => _0.,2,Congestion
exten => _0.,3,Hangup
So when I dial 0500, I should be connected to number 500.
This is not the case: a telephone with number 500 never rings.
This is what asterisk says when run with -cvvv:
-- Executing Dial("SIP/201-f853", "Zap/0/500") in new
stack
-- Called 0/500
-- Zap/pseudo-164837434 answered SIP/201-f853
It behaves the same even if I call an non-existing number, or I
disconnect an ISDN cable.
Dialing in works fine, so it's not a problem with a card.
Any clue?
If it's any help, I am using asterisk@home 1.0.
# cat /etc/asterisk/zapata.conf
[channels]
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=yes
group = 0
context=default
channel => 1-2
# cat /etc/zaptel.conf
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
# lspci
(...)
00:0a.0 Network controller: Cologne Chip Designs GmbH ISDN network
controller [HFC-PCI] (rev 02)
----------------------------------------------------------------------
Znajdz swoja milosc na wiosne... >>> http://link.interia.pl/f187a