TE101P card T1 E&M trunk to telco
on a SIP->PSTN call, after dial
SIP phone hears two seconds busy tone (1) then ring tone
how do we get rid of busy tone?
(1) two second busy
(480+620/500 0/500 480+620/500 0/500)
---------------------------------------------------
extensions.conf:
;
; dial-out to the PSTN with 7 digits
;
exten => _NXXXXXX,1,Dial(Zap/g1/${EXTEN})
exten => _NXXXXXX,n,Hangup()
zaptel.conf:
span=1,1,0,esf,b8zs
e&m=1-24
loadzone = us
defaultzone=us
zapata.conf:
[trunkgroups]
[channels]
language=en
context=default
signalling=featb
usecallerid=no
callwaiting=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=8
channel => 1-24
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005
If Feature Group B signaling is working properly (and you have Feature Group
B trunks), then
to reach your Asterisk box you would dial from the PSTN (1)+950+WXXX {W is 1
or 0 based on the number assigned to you}.
If you are dialing "out" {terminating where you look like the carrier}
on
FGB then it depends on if you are connected to an Equal Access End Office or
a Access Tandem.
Are you sure about the Feature Group B thing or do you have trunks that just
require MF signaling?
If you want MF, you might try the "featdmf" setting, however, the
telco
needs to know that you want FGD.
AND...
If you are connecting to an Access Tandem instead of and End Office, then
the "featdmf" in Asterisk will not work.
I have submitted a request for a quote to Digium to modify the code to make
this work properly.
Likewise, true FGB "terminating" (where it looks like you are the
carrier)
works through an Access Tandem and the additional code is missing for that
also.
Take out the featb and add:
em_w
This will let you see if just plain old DTMF works.
James Taylor
903-793-1956
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of John Ackley
Sent: Sunday, April 24, 2005 4:44 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] T1 E&M false busy after dial
TE101P card T1 E&M trunk to telco
on a SIP->PSTN call, after dial
SIP phone hears two seconds busy tone (1) then ring tone
how do we get rid of busy tone?
(1) two second busy
(480+620/500 0/500 480+620/500 0/500)
---------------------------------------------------
extensions.conf:
;
; dial-out to the PSTN with 7 digits
;
exten => _NXXXXXX,1,Dial(Zap/g1/${EXTEN})
exten => _NXXXXXX,n,Hangup()
zaptel.conf:
span=1,1,0,esf,b8zs
e&m=1-24
loadzone = us
defaultzone=us
zapata.conf:
[trunkgroups]
[channels]
language=en
context=default
signalling=featb
usecallerid=no
callwaiting=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=8
channel => 1-24
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
thanks info and suggestion we have a plain old PBX DID trunk from our telco will try to get more information about the trunk meanwhile I tried as documented in my zapata.conf: ; JNA tried all below - and even NO signaling same resuts ;Apr 24 21:11:15 WARNING[4430]: chan_zap.c:10198 setup_zap: Ignoring :signalling ;-- Reconfigured channel 1, Feature Group B (MF) signalling ; etc. ; ;signalling=featb :signalling=em_w ;signalling=sf_featb ;signalling=sf_featdmf ;signalling=sf jltaylor wrote:>If Feature Group B signaling is working properly (and you have Feature Group >B trunks), then >to reach your Asterisk box you would dial from the PSTN (1)+950+WXXX {W is 1 >or 0 based on the number assigned to you}. > >If you are dialing "out" {terminating where you look like the carrier} on >FGB then it depends on if you are connected to an Equal Access End Office or >a Access Tandem. > >Are you sure about the Feature Group B thing or do you have trunks that just >require MF signaling? > >If you want MF, you might try the "featdmf" setting, however, the telco >needs to know that you want FGD. >AND... >If you are connecting to an Access Tandem instead of and End Office, then >the "featdmf" in Asterisk will not work. >I have submitted a request for a quote to Digium to modify the code to make >this work properly. > >Likewise, true FGB "terminating" (where it looks like you are the carrier) >works through an Access Tandem and the additional code is missing for that >also. > >Take out the featb and add: >em_w > >This will let you see if just plain old DTMF works. > >James Taylor >903-793-1956 > > > > > >-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005
Normally, "plain old PBX DID trunks" are em_w (dtmf). Strange, the only other problem might be the timing of the wink. James -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of John Ackley Sent: Sunday, April 24, 2005 8:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] T1 E&M false busy after dial thanks info and suggestion we have a plain old PBX DID trunk from our telco will try to get more information about the trunk meanwhile I tried as documented in my zapata.conf: ; JNA tried all below - and even NO signaling same resuts ;Apr 24 21:11:15 WARNING[4430]: chan_zap.c:10198 setup_zap: Ignoring :signalling ;-- Reconfigured channel 1, Feature Group B (MF) signalling ; etc. ; ;signalling=featb :signalling=em_w ;signalling=sf_featb ;signalling=sf_featdmf ;signalling=sf jltaylor wrote:>If Feature Group B signaling is working properly (and you have FeatureGroup>B trunks), then >to reach your Asterisk box you would dial from the PSTN (1)+950+WXXX {W is1>or 0 based on the number assigned to you}. > >If you are dialing "out" {terminating where you look like the carrier} on >FGB then it depends on if you are connected to an Equal Access End Officeor>a Access Tandem. > >Are you sure about the Feature Group B thing or do you have trunks thatjust>require MF signaling? > >If you want MF, you might try the "featdmf" setting, however, the telco >needs to know that you want FGD. >AND... >If you are connecting to an Access Tandem instead of and End Office, then >the "featdmf" in Asterisk will not work. >I have submitted a request for a quote to Digium to modify the code to make >this work properly. > >Likewise, true FGB "terminating" (where it looks like you are the carrier) >works through an Access Tandem and the additional code is missing for that >also. > >Take out the featb and add: >em_w > >This will let you see if just plain old DTMF works. > >James Taylor >903-793-1956 > > > > > >-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.18 - Release Date: 4/19/2005 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users