Hi Guys I am trying to install a HFC-S isdn card into asterisk. Bri-stuff installs fine and I have managed to get *-v-1.0.7 installed. All seems to run without a problem, well except for the fact that the card does not answer any incoming calls or make any outgoing calls. My zaptel.conf looks like this: more /etc/zaptel.conf # hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=us defaultzone=us span=1,1,3,ccs,ami bchan=1-2 dchan=3 I have changed the default zones to a few different countries, nothing has made any difference. more /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] language=en ;switchtype = euroisdn ; p2mp TE mode ;signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 09 echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=yes group = 1 context=demo channel => 1-2 [dmesg] zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd89a1000 fifo 0xd1ed8000(0x11ed8000) IRQ 3 HZ 1000 zaphfc: Card 0 configured for TE mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) [root@carmen zaphfc]# ztcfg -vv Zaptel Configuration ===================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. I have plugged the system into an ISDN NT1 box, and still cannot manage to get something good. I have googled to my wits end and any help would be appreciated. If anyone has some documentation on all the different options one has to ones disposal, would also be appreciated. All my SIP phones work internally, I can send my extensions.conf as well as sip.conf if needed. TIA Kind Regards Terry Wade Mobile: +27 82 802-5750 Office: +27 11 784-7642 Fax: +27 11 388-0855 Linux is like a Wigwam - No gates, no windows, Apache inside Disclaimer and Confidentiality Warning This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ActiCom. Consequently, ActiCom does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ActiCom without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050419/0fd5ba59/attachment.htm