I want to signal BUSY condition to a bristuffed HFC-S ISDN line. However: "exten => s,1,Busy" has no effect, "exten => s,1,Playtones(Busy)" is not audable over unanswered line (I live in the Netherlands...) So I currently do: + exten => s,1,Answer + exten => s,2,Playtones(Busy) + exten => s,3,Busy Which obviously is not an ideal solution. Is there a way to get real signalling out a bristuffed HFC-S ?
On Fri, 15 Apr 2005, Stefan Gofferje wrote:> Bob van der Moezel schrieb: > >I want to signal BUSY condition to a bristuffed HFC-S ISDN line. > > > >However: > > "exten => s,1,Busy" has no effect, > > "exten => s,1,Playtones(Busy)" is not audable over unanswered line (I > >live in the Netherlands...) > > > >So I currently do: > >+ exten => s,1,Answer > >+ exten => s,2,Playtones(Busy) > >+ exten => s,3,Busy > >Which obviously is not an ideal solution. > > > >Is there a way to get real signalling out a bristuffed HFC-S ? > > > I have the same problem with a Fritz!PCI and chan_capi as external line. > I have a HFC-S card in NT mode as internal ISDN. On this card, Busy and > Congestion do work. > As both drivers came from Junghanns, I suppose, this is a problem with > the drivers...In HEAD this is accomplished through the variable PRI_CAUSE and the Hangup application. This is the most generic way. Read more in the wiki or search the mail archives. Additionally the behviour of the Busy and Congestion applications can be changed by setting oob_indication in the zapata config file. Peter
The problem of Q931 SETUP I have also depends on Junghanns and they do not support in any way the products the sell... ----- Original Message ----- From: "Stefan Gofferje" <stefan@gofferje.homelinux.org> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Friday, April 15, 2005 8:30 AM Subject: Re: [Asterisk-Users] ISDN BRI and signalling> Bob van der Moezel schrieb: > > >I want to signal BUSY condition to a bristuffed HFC-S ISDN line. > > > >However: > > "exten => s,1,Busy" has no effect, > > "exten => s,1,Playtones(Busy)" is not audable over unanswered line (I > >live in the Netherlands...) > > > >So I currently do: > >+ exten => s,1,Answer > >+ exten => s,2,Playtones(Busy) > >+ exten => s,3,Busy > >Which obviously is not an ideal solution. > > > >Is there a way to get real signalling out a bristuffed HFC-S ? > > > > > I have the same problem with a Fritz!PCI and chan_capi as external line. > I have a HFC-S card in NT mode as internal ISDN. On this card, Busy and > Congestion do work. > As both drivers came from Junghanns, I suppose, this is a problem with > the drivers... > > Regards, > Stefan > > -- > (o_ Stefan Gofferje | Linux Systems Specialist > //\ Reg'd Linux User #247167 | Network Security Specialist > V_/_ Heckler & Koch - the original point and click interface > > >