asterisk users - Apr 2005 - Transferring a call

Hello,

I have successfully connected an Asterisk PBX to an old Panasonic Phone System
using an AVM Fritz PCI card. But when I make a call through the Asterisk PBX to
the old phone system, and the receiver wants to transfer the call to another
internal number, I get a busy tone. Does anyone have any suggestions to overcome
this problem? Any help would be great.

Thanks,

Dennie
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050413/4d3a88fe/attachment.htm

If the Fritz is an FXO card, then when you connect to the phone system, you
look like another station port.  There might be something in the
configuration of the phone system that's preventing you from transferring a
station to station call to somewhere else.
 
Brian Leyton
IT Manager
Commercial Petroleum Equipment


  _____  

From: Dennie Verstrepen [mailto:Dennie.Verstrepen@secuteam.com] 
Sent: Wednesday, April 13, 2005 7:17 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Transferring a call




Hello,

I have successfully connected an Asterisk PBX to an old Panasonic Phone
System using an AVM Fritz PCI card. But when I make a call through the
Asterisk PBX to the old phone system, and the receiver wants to transfer the
call to another internal number, I get a busy tone. Does anyone have any
suggestions to overcome this problem? Any help would be great.

Thanks,

Dennie 

__________________________________________________
This mail has been scanned for viruses by an AXS Web Firewall, 
powered by SecuTeam NV.
_________________________________________________
This mail has been scanned for all known viruses by AXS Mail powered by
SecuTeam NV.
Register for AXS Mail at http://www.secuteam.com
<hthttp://www.secuteam.com>
! 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050413/b13680f1/attachment.htm