David Phelan
2005-Apr-13 00:13 UTC
[Asterisk-Users] Sipura SPA-841 and Asterisk 1.0.7 with chan_misdn
HI Everyone, I have run into a rather unusual Problem.. My Config as follows System 2.6.9 Kernel mISDN 0.0.3.RC6 AVM Fritz! X 3 chan_misdn-0.1.0 Asterisk CVS Stable. Handsets: Micronet SP5100 Micronet SP5001 ATA Sipura-841 (Latest FIrmware) When I Make Calls from the SPA to PSTN(or the reverse), at first calls go through clear. After the Second or third Call, we wind up with 4-7ms jitter. If I transfer the call to the Micronet(which doesn't seem to experience ANY difficulties), call is clear....transfer back to the SPA....jitter again the Jitter is only heard on the SPA end...the PSTN end of the call is fine.... Calls from sip to sip present no issues, as with calls to IAX2 trunks. Has anyone else run into this difficulty, or at least point me in a direction to try and fault find this Much Thanx Dave -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050413/0d04c474/attachment.htm