Hi all I newly added a X101P into my asterisk that already have a TE410P running 2 E1s namely span1 and span2 I am unable to get * to recognized the new X101P after i did modprbe wct4xxp and then modprobe wcfxo. ztcfg -vv reported all 63 channels are configured but zttool tells me that span 1,2,3 are OK and X101P UNCONFIGURED. I do not have anything plug into span 3 below are what i have zapata.conf [channels] context=default overlapdial=no signalling=pri_cpe switchtype=euroisdn pridialplan=unknown rxwink=125 echocancel=no echocancelwhenbridged=yes rxgain=0.0 txgain=0.9 immediate=yes musiconhold=default group=1 channel => 1-15,17-31 busydetect=no group=2 channel => 32-46,48-62 busydetect=no group=5 signalling=fxs_ks channel=>63 context=default zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 alaw=1-31 span=2,1,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 alaw=32-62 fxsks=63 loadzone=us ztcfg -vv Channel 62: Individual Clear channel (A-law) (Slaves: 62) Channel 63: FXS Kewlstart (Default) (Slaves: 63)63 channels configured. --------------------------------- Do you Yahoo!? Make Yahoo! your home page -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050412/5933008b/attachment.htm
LeeLee- Try configuring all 4 spans first and then the single channel (125) above that - works for me. Modprobe in the same order, then ztcfg. Regards Scott Stingel www.evtmedia.com Lee Lee wrote:> Hi all > > I newly added a X101P into my asterisk that already have a TE410P > running 2 E1s namely span1 and span2 > > I am unable to get * to recognized the new X101P after i did modprbe > wct4xxp and then modprobe wcfxo. ztcfg -vv reported all 63 channels > are configured but zttool tells me that span 1,2,3 are OK and X101P > UNCONFIGURED. > > I do not have anything plug into span 3 > > below are what i have > > _zapata.conf_ > > [channels] > context=default > overlapdial=no > signalling=pri_cpe > switchtype=euroisdn > pridialplan=unknown > rxwink=125 > echocancel=no > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.9 > immediate=yes > musiconhold=default > group=1 > channel => 1-15,17-31 > busydetect=no > group=2 > channel => 32-46,48-62 > busydetect=no > group=5 > signalling=fxs_ks > channel=>63 > context=default > _zaptel.conf_ > > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > dchan=16 > alaw=1-31 > span=2,1,0,ccs,hdb3,crc4 > bchan=32-46,48-62 > dchan=47 > alaw=32-62 > fxsks=63 > loadzone=us > _ztcfg -vv_ > > Channel 62: Individual Clear channel (A-law) (Slaves: 62) > Channel 63: FXS Kewlstart (Default) (Slaves: 63) > 63 channels configured. > > ------------------------------------------------------------------------ > Do you Yahoo!? > Make Yahoo! your home page > <http://us.rd.yahoo.com/my/navbar/sethp/*http://www.yahoo.com/r/hs> > >------------------------------------------------------------------------ > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
On Tue, 2005-04-12 at 05:14 -0700, Lee Lee wrote:> Hi all > > I newly added a X101P into my asterisk that already have a TE410P > running 2 E1s namely span1 and span2 > > I am unable to get * to recognized the new X101P after i did modprbe > wct4xxp and then modprobe wcfxo. ztcfg -vv reported all 63 channels > are configured but zttool tells me that span 1,2,3 are OK and X101P > UNCONFIGURED. > > I do not have anything plug into span 3Even if you don't config spans 3/4 you still need to leave space for them. So, if you are using E1 (sounds like it) the x101p should be 125 not 63. Regards, Adam -- -- Adam Goryachev Website Managers Ph: +61 2 9345 4395 adam@websitemanagers.com.au Fax: +61 2 9345 4396 www.websitemanagers.com.au