asterisk users - Apr 2005 - Got S-frame while link down

Hello,

I connected the TE110P directly to the carrier port now.
I got a green signal light at the card, zttool reports no problem.

Still, I can't dial out. 

Asterisk reports:
chan_zap.c:7143 zt_pri_error: PRI: !! Got S-frame while link down

When I try to dial out with a SIP phone:
app_dial.c:749 dial_exec: Unable to create channel of type 'Zap'
  == Everyone is busy/congested at this time


/etc/zaptel.conf
===============span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=fr
defaultzone=fr
pbx01:/etc/asterisk# 
pbx01:/etc/asterisk# cat ../zaptel.conf
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=fr
defaultzone=fr

/etc/asterisk/zapata.conf
========================[channels]
context=remote
pridialplan=local
prilocaldialplan=local
usecallingpres=yes
busydetect=no
callprogress=no
callwaitingcallerid=yes
echotraining=no
echocancel=no
echocancelwhenbridged=no
overlapdial=yes
immediate=no
callerid=asreceived
language=de
rxgain=0.0
txgain=0.0
switchtype=euroisdn
signalling=pri_net
group=1
channel => 1-15,17-31


Regards,
Henry

On Wed, Apr 06, 2005 at 12:40:57PM +0200, Henry Jensen
wrote:
> /etc/asterisk/zapata.conf
> ========================> [channels]
> context=remote
> pridialplan=local
> prilocaldialplan=local
> usecallingpres=yes
> busydetect=no
> callprogress=no
> callwaitingcallerid=yes
> echotraining=no
> echocancel=no
> echocancelwhenbridged=no
> overlapdial=yes
> immediate=no
> callerid=asreceived
> language=de
> rxgain=0.0
> txgain=0.0
> switchtype=euroisdn
> signalling=pri_net

When I change this to "signalling=pri_cpe" I get rid of the
"Everyone is busy"
message, but besides of this it remains the same, still 
"Unable to create channel of type 'Zap'"
and
"Got S-frame while link down"


> group=1
> channel => 1-15,17-31