I travel among about 5 different offices each day, as I get to each one, I plug in a Packet8 DTA310 that has been upgraded to the latest firmware that allows setting SIP settings. At most of these locations, the router is a NearGear WGT624 and everything works great, however, at one location also using a Netgear WGT624 v2 (the same as the others, all running the same firmware rev) the DTA locks up solid within two - five seconds of being plugged in. This has been tested with nothing else plugged into the router except for internet access and the DTA310. At all other locations, this connects to my remote Asterisk box perfectly. I realize that this use of a DTA310 is by no means a supported configuration but other than this ONE location, it has been working perfectly. I am open to any suggestions at this point as I do spend 10 hours a week at this location, it would be nice if it worked. The only other useful information I can think of is that X-Lite does work perfectly at this location so it "seems" as if its a problem with the router but again, I use this identical configuration at multiple locations. -Kerry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050401/c14b28bc/attachment.htm