asterisk users - Mar 2005 - RE: Asterisk-Users Digest, Vol 8, Issue 186

It is not all that hard to do. Once you have all your phones setup with
their own extension. When a call comes in from say 6000

Exten => 6000,1,Dial(SIP/phone1&SIP/phone2&SIP/phone3,20)
Exten => 6000,2,Voicemail(vm#)
Exten => 6000,3,Hangup

This would ring SIP phones 1 through 3 all at the same time. Hope this
helps.

Dan


------------------------------

Message: 13
Date: Tue, 22 Mar 2005 12:57:32 -0800
From: "Kerry Garrison" <kerryg@techdatapros.com>
Subject: RE: [Asterisk-Users] Quick Newbie Question - Auto Call
	Routing
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
	<asterisk-users@lists.digium.com>
Message-ID: <0MKyxe-1DDqRT3bHE-0007al@mrelay.perfora.net>
Content-Type: text/plain; charset="us-ascii"

Very possible. Its just a matter of assigning everyone their own
extension,
then adding all of the extensions to a call group and setting the
inbound
calling plan to go to the call group. Granted, thats easier said than
done.
I could easily explain it with Asterisk@Home/AMP Interface but I'm not
sure
how to do all of that manually.
-Kerry
 

  _____  

From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gordon
Anderson
Sent: Tuesday, March 22, 2005 12:27 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Quick Newbie Question - Auto Call Routing



Hello all, 

Quick description of scenario: 

Would like to be able to plug in an analog line to a Digium Wildcard
X100P
FXO card in an * server.  Whenever that line receives a call, we would
like
it to automatically ring a hunt group of VoIP soft phones that are
connected
to the * server.  Is this possible, and if it is, what's the easiest way
to
go about it?

My thanks in advance. 

Gordon 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050322/a6
64af90/attachment-0001.htm