asterisk users - Mar 2005 - Quick Newbie Question - Auto Call Routing

Hello all,

Quick description of scenario:

Would like to be able to plug in an analog line to a Digium Wildcard
X100P FXO card in an * server.  Whenever that line receives a call, we
would like it to automatically ring a hunt group of VoIP soft phones
that are connected to the * server.  Is this possible, and if it is,
what's the easiest way to go about it?

My thanks in advance.

Gordon
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050322/63cca981/attachment.htm

Very possible. Its just a matter of assigning everyone their own extension,
then adding all of the extensions to a call group and setting the inbound
calling plan to go to the call group. Granted, thats easier said than done.
I could easily explain it with Asterisk@Home/AMP Interface but I'm not sure
how to do all of that manually.
-Kerry
 

  _____  

From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gordon
Anderson
Sent: Tuesday, March 22, 2005 12:27 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Quick Newbie Question - Auto Call Routing



Hello all, 

Quick description of scenario: 

Would like to be able to plug in an analog line to a Digium Wildcard X100P
FXO card in an * server.  Whenever that line receives a call, we would like
it to automatically ring a hunt group of VoIP soft phones that are connected
to the * server.  Is this possible, and if it is, what's the easiest way to
go about it?

My thanks in advance. 

Gordon 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050322/a664af90/attachment.htm

Kerry,
 
Thanks for the reply.  I THINK I have it figured out and set up properly
now after going through the AMP interface, but we'll have to see once we
get the card we ordered from eBay today.  I ended up setting all
incoming calls to go to a call group with all the extensions we want
(wasn't sure I was doing it correctly, as the radio buttons are grayed
out but still change when you select one of the pull-downs). Again,
thanks for the reply and I'll let you know how it goes later this week.
 
Gordon

	-----Original Message-----
	From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry
Garrison
	Sent: Tuesday, March 22, 2005 1:58 PM
	To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
	Subject: RE: [Asterisk-Users] Quick Newbie Question - Auto Call
Routing
	
	
	Very possible. Its just a matter of assigning everyone their own
extension, then adding all of the extensions to a call group and setting
the inbound calling plan to go to the call group. Granted, thats easier
said than done. I could easily explain it with Asterisk@Home/AMP
Interface but I'm not sure how to do all of that manually.
	-Kerry
	 

  _____  

	From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gordon
Anderson
	Sent: Tuesday, March 22, 2005 12:27 PM
	To: asterisk-users@lists.digium.com
	Subject: [Asterisk-Users] Quick Newbie Question - Auto Call
Routing
	
	

	Hello all, 

	Quick description of scenario: 

	Would like to be able to plug in an analog line to a Digium
Wildcard X100P FXO card in an * server.  Whenever that line receives a
call, we would like it to automatically ring a hunt group of VoIP soft
phones that are connected to the * server.  Is this possible, and if it
is, what's the easiest way to go about it?

	My thanks in advance. 

	Gordon 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050322/5c378c3b/attachment.htm

Install asterisk * home.. it will quickly allow you to set things
up... as well as creating the HG.


On Tue, 22 Mar 2005 13:27:29 -0700, Gordon Anderson
<GordonA@mistermoney.com> wrote:
>  
> 
> Hello all, 
> 
> Quick description of scenario: 
> 
> Would like to be able to plug in an analog line to a Digium Wildcard X100P
> FXO card in an * server.  Whenever that line receives a call, we would like
> it to automatically ring a hunt group of VoIP soft phones that are
connected
> to the * server.  Is this possible, and if it is, what's the easiest
way to
> go about it? 
> 
> My thanks in advance. 
> 
> Gordon 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

On Tue, 22 Mar 2005 13:27:29 -0700, Gordon Anderson
<GordonA@mistermoney.com> wrote:
> Quick description of scenario: 
> 
> Would like to be able to plug in an analog line to a Digium Wildcard X100P
> FXO card in an * server.  Whenever that line receives a call, we would like
> it to automatically ring a hunt group of VoIP soft phones that are
connected
> to the * server.  Is this possible, and if it is, what's the easiest
way to
> go about it? 
IANA*E (I am not an asterisk expert) but I'm pretty sure simply
setting the context in zapata.conf to that of a huntgroup macro (I
haven't implemented a huntgroup on my * server just yet...) should do
the trick.

aaron.glenn