Hi, my asterisk is connected to the internal S0 of my ISDN PBX. Dialing 20 with a phone connects to the HFC-S card in my asterisk just fine, I get a dialtone and can get out via SIP. So far so good. I would like to be able to dial 20<number> without a wait, though. With i4l DTMF, this worked fine (if DTMF worked at all). With zaphfc I need to wait after the 20 until I get a dialtone, or add another number or a "*" between the prefix and the phone number proper. The zapata.conf reads [channels] switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan = local echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=no group = 1 context=intern channel => 1-2 /etc/zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 loadzone = us defaultzone=us what gives? (I am missing loadzone=de in zaptel-1.0.6. "de" is available in the SUSE 9.2 packages. Is that a SUSE patch?) -- " ... I told my doctor I got all the exercise I needed being a pallbearer for all my friends who run and do exercises!" -- Winston Churchill