Hi all, Having an issue in getting our first asterisk server recognising the channels on our E1. At the moment, when we start up the machine, everything goes well, but the light on our single span TE110P card flashes red (slowly). I imagine that I'm supposed to get a green light when a connection has been made. (lol - else I'm not sure what it's there for :P) Can anyone give me some pointers as to what I should be looking for here? I'm pretty new to this and I'm eager to get it up and running. Cheers, Callum -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/e060bf2e/attachment.htm
I am no expert but I hope I can be of help. What is your /etc/zaptel.conf and /etc/asterisk/zapata.conf? There is 2 points it can be a problem that I have found, the cable, as depending on requirements a normal patch lead or a specific pin cross over cable maybe needed. The other place is the span setup in the zaptel.conf and the signalling in the zapata.conf Depending on where in the world you are will dictate the span setup for the E1. Have a read of http://www.digium.com/index.php?menu=configuration#T_E100P_PRI It helped me out with the span configuration requirements. James ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Callum McGillivray Sent: Friday, 11 March 2005 4:22 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E1 LED not lighting up.... Hi all, Having an issue in getting our first asterisk server recognising the channels on our E1. At the moment, when we start up the machine, everything goes well, but the light on our single span TE110P card flashes red (slowly). I imagine that I'm supposed to get a green light when a connection has been made. (lol - else I'm not sure what it's there for :P) Can anyone give me some pointers as to what I should be looking for here? I'm pretty new to this and I'm eager to get it up and running. Cheers, Callum -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/cbaf5e94/attachment.htm
Mario.Spoljar@hypo-alpe-adria.com
2005-Mar-11 01:03 UTC
[Asterisk-Users] TE110P experiance
Hello to all, I would like to ask some Digium TE110P users if they can share experiance about this card. I put in service card yesterday but I noticed following (strange) behaviar: - if I have to reboot my computer my zaptel driver fail to start and produce this error: ZT_SPANCONFIG failed on span 1: No such device or address (6) - to solve this problem I have to power cycle my computer and in all cases this brings up card! - does anybody have any info about this hardware, example there are two LED - what is the meaning of these LEDs. I bought this card and got anly card without any papers (just bill :-( ) Regards, mario.spoljar@hypo-alpe-adria.com