I am trying to get Asterisk to work with my old PBX, a Siemens Hicom 150E. In my Asterisk server I have a Eicon Diva BRI card(that supports QSIG) it is then connected to my PBX via S0/QSIG. How do I configure CAPI to use QSIG? Is QSIG supported by Asterisk? Regards, Jan Berggren janne at intellit dot se -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050222/00ba87df/attachment.htm
On Tue, Feb 22, 2005 at 04:31:39PM +0100, Jan Berggren wrote:> > I am trying to get Asterisk to work with my old PBX, a Siemens Hicom > 150E. In my Asterisk server I have a Eicon Diva BRI card(that supports > QSIG) it is then connected to my PBX via S0/QSIG. > > How do I configure CAPI to use QSIG? Is QSIG supported by Asterisk?Just set your switchtype in zapata.conf to type qsig Matthew Fredrickson
Use setcallerid On Fri, 25 Feb 2005 01:32:00 GMT, Iqbal <iqbal@gigo.co.uk> wrote:> > Hi > > Does asterisk allow you to display the number that is called > > eg inbound pstn number is 342672899 this is mapped to extension 111, now > on the IP phone attached to this extension, I want to display 111 as the > number called. Purpose is that when I have multiple incoming lines and > each number/line is assigned to a customer, I can see which customer has > called. > > All the exntension 111,222,333 will all be mapped to one IP phone. > > tks > > Iqbal > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >