asterisk users - Jan 2005 - IAX2 firmware for PA168x (Giptel G100, Siptronic ST-100 etc)

Hi there,

this is just a short note about one of the PA168x based phones out there 
which I obtained as "Giptel G100" (aka Siptronic ST-100): For some
reason
this phone would refuse to register with Asterisk using SIP, but after 
uploading the IAX2 firmware instead it finally came to life:

http://www.voip-info.org/tiki-index.php?page=GIPTEL+IP+Phones

Cheers, Philipp

On Sun, 30 Jan 2005 21:40:01 +0100, Philipp von Klitzing wrote:
>Hi there,
>
>this is just a short note about one of the PA168x based phones out there 
>which I obtained as "Giptel G100" (aka Siptronic ST-100): For some
reason
>this phone would refuse to register with Asterisk using SIP, but after 
>uploading the IAX2 firmware instead it finally came to life:
>
>http://www.voip-info.org/tiki-index.php?page=GIPTEL+IP+Phones
>
>Cheers, Philipp
>
except it should be 5060.

I current use the WuChuan version (5111soft.com)

SIP works well, (so does IAX2).

correct port addressing and rtp ports is required.
.