Thanks for you comments. I have the one port card now. I plan on
purchasing the TDM400. My only question is whether or not the Dell
optiplex has pci 2.1 (I think)
I have one system running with the single port card. Today I received 2
sipura 2000 modules. Configured the first one tonight... Works great.
Pat
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Doug Lytle
Sent: Monday, January 24, 2005 9:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] (no subject)
Pat Delaney wrote:
> AS a proof of concept experiment, I want to try and integrate Asterisk
> with my Lucent Definity G3 switch. I don't have an available T1 port
> on the G3 but I can round up 4 analog ports off the G3. What I thought
> I could do is create a "Hunt group" on the G3. Let's say I
configure
> 5610 - 5613 as a hunt group. I know I would need a 4 port FXO card to
> install in the Asterisk server. Two configuration questions come to
> mind. I'll assume I can configure the Sip's phone to use the POTS
> lines for non-Sips calls
>
Correct.
> , but I want to hid the fact that the Asterisk will need to dial
"9"
> on the analog port to pass the call through the G3. I suppose the End
> user could dial 99xxx-xxxx to pass the 9 needed by the G3. Is there a
> way to hid that from them.
>
Yes, via your dial-plan on the Asterisk box.
> Second question, can I set up a dial plan based on those 4 G3 POTS
> lines that connect to Asterisk? Let's say that some calls 5611 from
> the G3, can asterisk determine that the call is coming in from 5611,
> and will it understand the G3's caller ID?
>
Only if you can configure the G3 to pass caller id info, our G3 admin
couldn't. the 4 lines you want to pass to Asterisk will connect via
their own ZAP channel. 5610=ZAP1, 5611, ZAP2 and so on. You can use
that in your dial-plan to pass incoming to certain extensions on
Asterisk.
Since this is only a proof of concept, this should do very well. But,
keep in mind that the X100P cards have limits on the number of cards
within 1 PC. They generate LARGE amounts of interrupts. I have no
experience with the TDM400 cards. Just 1 X100P and 1 T100P.
Have fun,
Doug
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users