morn all, I ran into a strange issue last night and have not been able to find resolution either in documentation (wiki) or experamentation. Using a handyton to feed dial tone to a pbx I am able to connect both ways with no problem. If I make a call from the pbx through asterisk I can sent DTMF tones with no problem. If I call into the pbx (through) the Handytone I am not able to pass DTMF tones. I hear a slight beep then silence. I have tried the Handytone set for DTMF info and rfc-2833 (as well as exp with inband) as well as the sip.conf entry for it. I thought I had a pretty good handle on how DTMF was intercepted and regenerated but ... ahhem .. guess not. Thanks for any Ideas in advance. mike -- |- - - - - - - - - - - - - - - - - - - -| |- Mike Dewey of -| |= All Technologies Unlimited, Inc =| |- phone: 303.667.0357 -| |- e-mail: mdewey@alltechunlimited.com -|
Hi Mike,> I have tried the Handytone set for DTMF info and rfc-2833 (as well as exp >with inband) as well as the sip.conf entry for it.>From my experience DTMF with any Grandstram device works well onlywith SIP INFO method ... give it a try (remember to set it up on asterisk as well). Best regards, Ivan Meic