asterisk users - Dec 2004 - install e100 card errors

Hi all:

I have install a E100P card. But when load the driver it reports error as
below:

root@localhost libpri]# modprobe wct1xxp
/lib/modules/2.4.18-3/misc/wct1xxp.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.4.18-3/misc/wct1xxp.o: insmod
/lib/modules/2.4.18-3/misc/wct1xxp.o failed
/lib/modules/2.4.18-3/misc/wct1xxp.o: insmod wct1xxp failed

the pci information as below:

[root@localhost libpri]# cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: PCI device 8086:2560 (Intel Corp.) (rev 3).
      Prefetchable 32 bit memory at 0xe8000000 [0xebffffff].
  Bus  0, device   2, function  0:
    VGA compatible controller: PCI device 8086:2562 (Intel Corp.) (rev 3).
      IRQ 12.
      Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
      Non-prefetchable 32 bit memory at 0xec100000 [0xec17ffff].
  Bus  0, device  29, function  0:
    USB Controller: PCI device 8086:24c2 (Intel Corp.) (rev 2).
      IRQ 12.
      I/O at 0xd800 [0xd81f].
  Bus  0, device  29, function  1:
    USB Controller: PCI device 8086:24c4 (Intel Corp.) (rev 2).
      IRQ 10.
      I/O at 0xd000 [0xd01f].
  Bus  0, device  29, function  2:
    USB Controller: PCI device 8086:24c7 (Intel Corp.) (rev 2).
      IRQ 9.
      I/O at 0xd400 [0xd41f].
  Bus  0, device  29, function  7:
    USB Controller: PCI device 8086:24cd (Intel Corp.) (rev 2).
      IRQ 5.
      Non-prefetchable 32 bit memory at 0xec180000 [0xec1803ff].
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 130).
      Master Capable.  No bursts.  Min Gnt=6.
  Bus  0, device  31, function  0:
    ISA bridge: PCI device 8086:24c0 (Intel Corp.) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: PCI device 8086:24cb (Intel Corp.) (rev 2).
      IRQ 9.
      I/O at 0x0 [0x7].
      I/O at 0x0 [0x3].
      I/O at 0x0 [0x7].
      I/O at 0x0 [0x3].
      I/O at 0xf000 [0xf00f].
      Non-prefetchable 32 bit memory at 0x1f800000 [0x1f8003ff].
  Bus  0, device  31, function  3:
    SMBus: PCI device 8086:24c3 (Intel Corp.) (rev 2).
      IRQ 11.
      I/O at 0x5000 [0x501f].
  Bus  1, device   8, function  0:
    Ethernet controller: PCI device 8086:103a (Intel Corp.) (rev 130).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=8.Max Lat=56.
      Non-prefetchable 32 bit memory at 0xec000000 [0xec000fff].
      I/O at 0xc000 [0xc03f].
  Bus  1, device  13, function  0:
    Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
      IRQ 10.
      Master Capable.  No bursts.  Min Gnt=1.Max Lat=128.
      Non-prefetchable 32 bit memory at 0xec001000 [0xec001fff].




Can someone tell how load the driver?

Jiangzhou