Hello, I'm a new Asterisk user and I hope I haven't missed something, but I can't seem to find an answer to this issue. I have a Cisco SIP gateway terminating calls into a 7960 phone. The issue I would like to fix is if I have an incoming call without an ANI, such as directly from my TDM phone switch, Asterisk says the call is coming from the IP address of the Cisco gateway, withough the dots, so if my gateway is at 10.0.0.1, Asterisk reports a call from "10001" instead of reporting "Unknown", or simply not reproting anything at all. It looks like there was some dicussions about a caller ID translation table. Is something like that what would be needed? Thanks, Brian
Brian McCrary wrote:> Hello, > > I'm a new Asterisk user and I hope I haven't missed something, but I > can't seem to find an answer to this issue. I have a Cisco SIP > gateway terminating calls into a 7960 phone. The issue I would like to > fix is if I have an incoming call without an ANI, such as directly from > my TDM phone switch, Asterisk says the call is coming from the IP > address of the Cisco gateway, withough the dots, so if my gateway is at > 10.0.0.1, Asterisk reports a call from "10001" instead of reporting > "Unknown", or simply not reproting anything at all.You should be able to set the inbound callerid from the switch/gateway to a specific unknown in sip.conf file with just a callerid= line. The place I looked on the wiki didn't show a specific description for the callerid= line, but that's what I thought I read for it somewhere. http://www.voip-info.org/wiki-Asterisk+config+sip.conf (currently hosed) http://64.233.179.104/search?q=cache:IIOmLeG89KwJ:www.voip-info.org/wiki-Asterisk%2Bconfig%2Bsip.conf+site:voip-info.org+sip.conf (google cache) -- Andrew Thompson http://aktzero.com/
I recently raised an issue which has just been fixed - this should clear your problem as well: http://bugs.digium.com/bug_view_page.php?bug_id=0002910 ----- Original Message ----- From: "Brian McCrary" <bmccrary@lwav.net> To: <asterisk-users@lists.digium.com> Sent: Monday, November 22, 2004 3:41 PM Subject: [Asterisk-Users] Unknown number CID on SIP phone> Hello, > > I'm a new Asterisk user and I hope I haven't missed something, but I > can't seem to find an answer to this issue. I have a Cisco SIP > gateway terminating calls into a 7960 phone. The issue I would like to > fix is if I have an incoming call without an ANI, such as directly from > my TDM phone switch, Asterisk says the call is coming from the IP > address of the Cisco gateway, withough the dots, so if my gateway is at > 10.0.0.1, Asterisk reports a call from "10001" instead of reporting > "Unknown", or simply not reproting anything at all. > > It looks like there was some dicussions about a caller ID translation > table. Is something like that what would be needed? > > Thanks, > > Brian > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >