asterisk users - Nov 2004 - txfax

Trying to send a fax using a call file and txfax.
Phone dials the remote fax answers but * gives me:

Call failed to go through, reason 3

And hangs up.

Any help.

Thanks
--John

John Hill wrote:
>Trying to send a fax using a call file and txfax.
>Phone dials the remote fax answers but * gives me:
>
>Call failed to go through, reason 3
>
>And hangs up.
>
>Any help.
>
>Thanks
>--John
>  
>
Did you add "|caller" to the command?

Steve

Is there some way to know if the fax was received correctly or not?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050908/f55d1313/attachment.htm

Hi,
do you know what it means the following:
"Call failed to go through, reason 3" 

I received it when I try to send a FAX and no one answer it.

Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050919/b0d8a439/attachment.htm

This is a wild guess, but maybe it means no one answered!

 

________________________________

From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Il Neofita
Sent: Monday, September 19, 2005 8:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] TXFAX

 

Hi,
do you know what it means the following:
"Call failed to go through, reason 3" 

I received it when I try to send a FAX and no one answer it.

Thank you

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050919/66c0509b/attachment.htm

Hi all,
I'm using spandsp 0.0.2pre21 with tiff 3.7.1 and asterisk 1.0.9
With rxfax application, everythinghs is ok, but when i try to send a fax
whit txfax application the channel got hangup. I'm testing send fax
towards an ATA grandstrem 488, but if i sent it to a normal fax i got
the same error.
This is what happen:
 
    -- Executing TxFAX("Zap/1-1",
"/fax07182006190657.tif|caller|debug")
in new stack
FLOW Slow carrier up
FLOW Slow carrier down
FLOW Slow carrier up
FLOW <<< NSF: 20 ad 00 36 20 00 00 00 00
FLOW NSF without final frame tag
FLOW The remote was made by 'HP'
FLOW <<< CSI: 40 37 37 34 39 35 34 34 20 35 38 30 20 39 33 2b 20 20 20
20 20
FLOW CSI without final frame tag
FLOW Remote fax gave CSI as: "+39 085 4459477"
FLOW <<< DIS: 80 00 ee f8 c4 80 92 80 80 98 00
FLOW DIS with final frame tag
FLOW In state 10
FLOW ???:
FLOW   3rd generation mobile network
FLOW   V.8 capable
FLOW   Prefer 64 octet blocks
FLOW   Reserved: 0x98
FLOW   Supported data signalling rates: V.29
FLOW   R8x7.7lines/mm and/or 200x200pels/25.4mm
FLOW   2D coding
FLOW   Scan line length: 215mm
FLOW   Recording length: A4 (297mm)
FLOW   Receiver's minimum scan line time: 20ms at 3.85 l/mm: T7.7 T3.85
FLOW   Uncompressed mode
FLOW   Reserved: 0x10
FLOW   Minimum scan line time for higher resolutions: T15.4 = T7.7
FLOW   Binary file transfer (BFT)
FLOW   Reserved: 1
FLOW ???:
FLOW   Prefer 256 octet blocks
FLOW   Reserved: 0x80
FLOW   Supported data signalling rates: V.27ter fallback mode
FLOW   2D coding
FLOW   Scan line length: 215mm
FLOW   Recording length: A4 (297mm)
FLOW   Receiver's minimum scan line time: 20ms at 3.85 l/mm: T7.7 T3.85
FLOW Start sending document
TIFFOpen: /fax07182006190657.tif: Cannot open.
FLOW Cannot open source TIFF file '/fax07182006190657.tif'
FLOW DIS nothing to send [0]
FLOW ???:
FLOW   Real-time Internet fax (T.38)
FLOW   V.8 capable
FLOW   Prefer 64 octet blocks
FLOW   Reserved: 0x90
FLOW   Supported data signalling rates: V.27ter fallback mode
FLOW   2D coding
FLOW   Scan line length: 215mm
FLOW   Recording length: A4 (297mm)
FLOW   Receiver's minimum scan line time: 20ms at 3.85 l/mm: T7.7 T3.85
FLOW   Reserved: 0x1
FLOW   Minimum scan line time for higher resolutions: T15.4 = T7.7
FLOW   Character mode
FLOW   Reserved: 0x10
FLOW DIS nothing to receive [0]
FLOW Changed from phase 2 to 4
FLOW >>> DCN: fb
FLOW HDLC underflow in state 2
FLOW Disconnecting
FLOW Changed from phase 4 to 7
FLOW Changed from phase 7 to 8
  == Spawn extension (incoming, XXXXXXXXXXXXX, 2) exited non-zero on
'Zap/2-1'
    -- Hungup 'Zap/2-1'
    -- Channel 0/1, span 1 got hangup
    -- Hungup 'Zap/1-1'

I'm going to check it towards several fax, but i think i will get the
same problem.
Anyone can help me?
 
Thanks very much
 
Giordano
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060718/989056b4/attachment.htm