asterisk users - Nov 2004 - Zaptel init script

I have just upgraded from Asterisk 0.7.2 to 1.0.2 and seem to be having 
an issue with the zaptel init script..

If I run..
#modprobe zaptel
#modprobe wcfxo
#modprobe wcfxs
.. from a command line it load and appears to be working fine..

If I try and use the init script I get errors about ZT_CHANCONFIG and 
the modules don't see to laod up..

Anyone got any pointers?

I am running Fedora Core 2 with all the updates and I have an X100P and 
a TDM400P with a single FXS module..

Later..

I had problems with the init script not working ing FC2 also.  I fixed it by
editing the init script and changing 'insmod' to 'modprobe'. 
Don't know if that will fix your problem or not, but it's worth a try.

--
Jim Dossey Computer Services

 -------------- Original message ----------------------
From: WipeOut <wipe_out@users.sourceforge.net>
> I have just upgraded from Asterisk 0.7.2 to 1.0.2 and seem to be having 
> an issue with the zaptel init script..
> 
> If I run..
> #modprobe zaptel
> #modprobe wcfxo
> #modprobe wcfxs
> .. from a command line it load and appears to be working fine..
> 
> If I try and use the init script I get errors about ZT_CHANCONFIG and 
> the modules don't see to laod up..
> 
> Anyone got any pointers?
> 
> I am running Fedora Core 2 with all the updates and I have an X100P and 
> a TDM400P with a single FXS module..
> 
> Later..
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Hi List,

we've made a litle script which is called /etc/init.d/zaptel. It scans 
the pci bus and creates by request a /etc/zaptel.conf and a 
/etc/asterisk/zapa.conf.

Also it loads the modules automagically.

If there are volunteers who want to try this out (it'll make first setup 
of an asterisk with digium cards easier) just grab it at:

www.beronet.com/downloads/zaptel-init.tar.gz

and type make install after unpacking.

Good Luck ;)