asterisk users - Nov 2004 - AW: Voice in Asterisk with BRI ISDN Any properworking configurations yet?

Hello Tim
 
I'm struggling to get a HFC card running in NT mode. It seems to work
for a short period but then stops. The messages on the asterisk console
mentione something about event 6. 
 
Is the zaphfc module enough to be loaded or must hisax also be loaded in
order to work?
 
Best regards,
Pascal.


  _____  

	Von: Robinson Tim-W10277 [mailto:Tim.Robinson@motorola.com] 
	Gesendet: Donnerstag, 18. November 2004 15:00
	An: Asterisk Users Mailing List - Non-Commercial Discussion
	Betreff: RE: [Asterisk-Users] Voice in Asterisk with BRI ISDN
Any properworking configurations yet?
	
	
	I have 3 HFC cards running in my PC in both NT and TE mode.
Works well..  What problems are you having, what have you tried?
	 
	Rgds
	Tim

		-----Original Message-----
		From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Christiaan
Brink
		Sent: 18 November 2004 13:40
		To: 'Asterisk Users Mailing List - Non-Commercial
Discussion'
		Subject: [Asterisk-Users] Voice in Asterisk with BRI
ISDN Any proper working configurations yet?
		
		

		Hi all

		 

		If been working a while now trying to interface
Asterisks with BRI ISDN.  I've tried various drivers without any
success.  I'm running a HFC passive ISDN board in 2.6.5 kernel.

		 

		Is there anybody out there who have successfully
interface voice with Asterisk using BRI ISDN from their public operator?

		 

		If so, can you please supply me with details regarding
the type of card used, manufacturer, etc.

		 

		Also can you please provide me with details regarding
the drivers used and so forth.

		 

		Kind Regards,

		Christiaan Brink

On Thu, 2004-11-18 at 14:35, Pascal C. Kocher wrote:
> Hello Tim
>  
> I'm struggling to get a HFC card running in NT mode. It seems to work
> for a short period but then stops. The messages on the asterisk console
> mentione something about event 6. 
>  
> Is the zaphfc module enough to be loaded or must hisax also be loaded in
> order to work?
zaphfc works fine in NT mode, no problems here (Ackermann Euracom P4 and
Teles.FON).

Don't load the HiSax driver and zaphfc, that would not work. If you have
another card (like Teles, Winbond etc.) that you need the HiSax driver
for, leave the support for the hfc based cards out during the
kernel-compile. You don't need it, when using zaphfc.

The reason, why it stops (like no dialtone anymore) is when you run
ztcfg more than once, after the machine has booted. That'll kill zaphfc
and is a known bug.

Sl?n leat,
Martin List-Petersen
Dublin, Eire 
(contact info on --> http://www.marlow.dk/)