fahmy kadiri
2004-Nov-15 05:22 UTC
[Asterisk-Users] Re: zap channel won't send/receive calls
Hi, I have a fxo card configured in my asterisk pbx.. but cant seem to make calls from POTS ---> sip or from sip ----> pots when I place a call, asterisk seems to begin the call processing -- Executing Dial("SIP/fahmy-452d", "Zap/1/4168880686") in new stack -- Called 1/4168880686 -- Zap/1-1 answered SIP/fahmy-452d and thats where it stops... no dial tone, the other side is not ringing, and nothing is happening on the line finally when I hang up this is what I see on console -- Hungup 'Zap/1-1' == Spawn extension (from-sip-internal, 94168880686, 1) exited non-zero on 'SIP/fahmy-452d' -- Executing Hangup("SIP/fahmy-452d", "") in new stack == Spawn extension (from-sip-internal, h, 1) exited non-zero on 'SIP/fahmy-452d' and if I make a call into my asterisk box from an external number, the call is detected, and a few seconds later it is hung up... still no dial tone -- Starting simple switch on 'Zap/1-1' -- Executing PrivacyManager("Zap/1-1", "") in new stack -- CallerID Present: Skipping -- Executing Dial("Zap/1-1", "SIP/1100&SIP/1400|30") in new stack Nov 14 20:32:45 WARNING[1632]: chan_sip.c:1386 create_addr: No such host: 1100 Nov 14 20:32:45 NOTICE[1632]: app_dial.c:743 dial_exec: Unable to create channel of type 'SIP' Nov 14 20:32:45 WARNING[1632]: chan_sip.c:1386 create_addr: No such host: 1400 Nov 14 20:32:45 NOTICE[1632]: app_dial.c:743 dial_exec: Unable to create channel of type 'SIP' == Everyone is busy/congested at this time -- Executing VoiceMail2("Zap/1-1", "b1100") in new stack -- Playing 'vm-theperson' (language 'en') -- Recording the message -- x=0, open writing: /var/spool/asterisk/voicemail/local/1100/INBOX/msg0000 format: wav, 0x8107580 and even though voicemail is being played i can't seem to hear it, then the call gets disconnected before I have a chance to leave voicemail I've tried everything and this is my last resort... any help is greatly appreciated here is my dmesg output... sorry for the long email dmesg output: ------------------ Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 12 for device 00:09.0 PCI: Sharing IRQ 12 with 00:10.1 wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Generic Clone ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Approval certification failed because of HiSax: unauthorized source code changes /etc/zaptel.conf -------------------- fxsks = 1 loadzone = us defaultzone = us /etc/asterisk/zapata.conf ----------------------- [channels] language=en context=from-analog signalling=fxs_ks usecallerid=yes echocancel=yes echocancelwhenbridged=yes channel => 1