Here's my a section of my simple extensions.conf exten => s,1,Answer exten => s,2,playback(thx4call) exten => s,3,Dial(Zap/1|15) ; Calls channel 1 exten => s,4,playback(trying_bert) exten => s,5,Dial(Zap/4/2326932|15) exten => s,6,Voicemail,u100 exten => s,7,hangup exten => s,104,Voicemail,b100 exten => s,105,hangup exten => s,106,Voicemail,u100 It works, but when the call is routed out on ZAP/4 (at priority 5), Asterisk seems to not realize the call is answered. After 15 seconds it proceeds to voicemail interrupting the call. Can anyone help? DB
hi Il dom, 2004-11-14 alle 00:13, DB ha scritto:> Here's my a section of my simple extensions.conf<snip>> exten => s,5,Dial(Zap/4/2326932|15) > exten => s,6,Voicemail,u100<snip>> It works, but when the call is routed out on ZAP/4 (at priority 5), > Asterisk seems to not realize the call is answered. After 15 seconds it > proceeds to voicemail interrupting the call. Can anyone help?eh, perhaps with some details about your zap... ie what card? zaptel.conf? zapata.conf? matteo, still without divinatory powers -- Brancaleoni Matteo <mbrancaleoni@espia.it> Espia Srl
Havent had that problem but look here http://www.voip-info.org/wiki-Asterisk+config+zapata.conf I would try callprogress=yes ----- Original Message ----- From: "DB" <DB@M-and-D.com> To: <asterisk-users@lists.digium.com> Sent: Saturday, November 13, 2004 6:13 PM Subject: [Asterisk-Users] Remote answer not detected> Here's my a section of my simple extensions.conf > > exten => s,1,Answer > exten => s,2,playback(thx4call) > exten => s,3,Dial(Zap/1|15) ; Calls channel 1 > exten => s,4,playback(trying_bert) > exten => s,5,Dial(Zap/4/2326932|15) > exten => s,6,Voicemail,u100 > exten => s,7,hangup > exten => s,104,Voicemail,b100 > exten => s,105,hangup > exten => s,106,Voicemail,u100 > > It works, but when the call is routed out on ZAP/4 (at priority 5), > Asterisk seems to not realize the call is answered. After 15 seconds it > proceeds to voicemail interrupting the call. Can anyone help? > > DB > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
> > Il dom, 2004-11-14 alle 00:13, DB ha scritto: >> Here's my a section of my simple extensions.conf > <snip> >> exten => s,5,Dial(Zap/4/2326932|15) >> exten => s,6,Voicemail,u100 > <snip> >> It works, but when the call is routed out on ZAP/4 (at priority 5), >> Asterisk seems to not realize the call is answered. After 15 seconds it >> proceeds to voicemail interrupting the call. Can anyone help? > > eh, perhaps with some details about your zap... > ie what card? > zaptel.conf? > zapata.conf? > > matteo, still without divinatory powersHi - thanks for the reply - here's that info: card is TDM22B zaptel.conf: =================fxoks=1-2 # Make sure that the FXS(green) modules are closest fxsks=3-4 # This is for the FXO module(s) becaus defaultzone=us loadzone=us ================= zapata.conf: ==================[trunkgroups] [channels] switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes callprogress=yes progzone=us signalling=fxo_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds callerid=asreceived group=1 context=MD_line1 ; Points to the default context of your extensions.conf channel => 1 signalling=fxo_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds callerid=asreceived group=2 context=MD_line2 ; Points to the default context of your extensions.conf channel => 2 signalling=fxs_ks group=3 context=incoming_9141252 channel=> 3 ; Again if you only have one FXO module remove the '-4' signalling=fxs_ks group=4 context=incoming_3493729 channel=> 4 ; Again if you only have one FXO module remove the '-4' =============================== DB